Paradyne GranDSLAM 4200 manual Coaxial

2. Cabling

3.Connect the other end of the cable to the appropriate network equipment such as a multiplexer.

Procedure

To connect to the 4202 E1 Uplink Module 75Ω connector:

1. Determine the interface type, and procure the appropriate coaxial cable.

2. Change the connector default to 75Ω using the ENT-T1or ED-T1TL1 command (LINETYPE=G703SHORT75).

3.Plug the TX coaxial cable into the TX 75Ω jack.

4.Plug the RX coaxial cable into the TX 75Ω jack.

CAUTION:

Do not plug cables into both the 120Ω and the 75Ω connectors at the same time.

RTN -
48VDC	3.5			ALAR
B		A	60
				M
A				C
				ONS
				OLE
PO
WER		A	B
				B
				ITS
				M
				GMT

S	K
U
T	IN
A L
T P
S U

MT

RES

L A T

4202	TX
E1 M		RX
ODULE	75Ω
		120Ω
		1	4
			8	12
		13	16
			20	24

Coaxial	02-17277
Cable

5.Connect the other end of the cables to the appropriate network equipment such as a multiplexer.

4200-A2-GN20-10 October 2002 2-5