4. Configuration
TCommand query. You can obtain help with CLI commands by typing a ? (question mark). A question mark alone lists all commands.
For example, if you enter:
RTRV ?
the CLI lists all the possible RTRV commands.
Command history. Pressing the Up Arrow key while entering a command returns the CLI to the previous command entry.
GranDSLAM 4200 Turn-up Procedure
You can turn up your GranDSLAM 4200 through the Ethernet connection via a PC or terminal connected to the unit’s CONSOLE port. Then, using a series of TL1 commands or an NMS system such as Paradyne’s GrandVIEW Element Management System (EMS), you configure the unit for operation.
he
Inband Management – Operates over the ATM interface. This is the default for the GranDSLAM 4200.
he
Manual Mode – If a DHCP server is not being used, you must manually assign
Tan IP address to your GranDSLAM 4200.
DHCP Mode – If you are using a DHCP server, you do not need manually assign an IP address since this is done automatically.
October 2002 |