Paradyne 1740 SHDSL manual Bridge Mode Service for One Fixed IP Address, Vci

Page 16

1740 SHDSL 2/4-Wire Router User’s Guide

3.2.1Bridge Mode: Service for One Fixed IP Address

To configure one static IP address, you need to set up the VC in RFC 1483 bridged mode. The router has a default Virtual Channel (VC) of 0/33. It can function without other modifications.

STEP 1: Click WAN Setup on the Basic menu bar, and enter values for: VPI, VCI, Encapsulation (LLC or VC MUX).

VPI	Enter a value for the vitual path identifier

VCI	Enter a value for the virtual channel identifier

LLCEncapsulation:	With LLC encapsulation, a link control header is added to the Ethernet
	packet that identifies the protocol type (Ethernet). This allows multiple
	protocols to be transmitted over the ATM Virtual Circuit.

VC Multiplexing:	With VC Multiplexing, no link control header is needed as the ATM
	Virtual Circuit is assumed to be carrying a single protocol.

Enable NAPT

This function cannot be set for bridge mode.

STEP 2: Click on RFC 1483 Bridged.

STEP 3: Click on the Add button. The new VC is added in the Current ATM PVC List on the bottom screen.

16

July 2004

1740-A2-GB20-00

Image 16

Contents Shdsl July 1740-A2-GB20-00 July Table of Contents Chapter Application Example Appendix a Specifications Overview ApplicationLED Indicators Color Mode FunctionInstallation Preparing for Hardware InstallationAC power adapter Four-wire 8P8C straight-through RJ45 cablePower connection Rear-panel ConnectionsDSL connection Ethernet connectionQuick Installation LoginJuly Web Page Layout Monitoring the Shdsl Line WAN Interface Configuration Bridge Mode Service for One Fixed IP Address VCI1740-A2-GB20-00 July Router Mode Service for Five Static IP Addresses 1740-A2-GB20-00 July July 1740-A2-GB20-00 July PPPoE Shdsl 2/4-Wire Router User’s Guide PPPoA 1740-A2-GB20-00 July Password Setup Setting the Bridge Spanning Tree ProtocolStatic Bridging Write System Configurations Load Factory Default Values Setting up WAN and LAN Interfaces LAN InterfaceConfiguring the WAN Interface VC Data Flow Control Setting up an ISP Enable Snmp SnmpDisable Snmp Packet Filter Add a Packet Filter entryEnable/Disable Packet Filter Delete a Packet Filter entryRouting Static RouteAdd ModifySet Up the RIP function 1740-A2-GB20-00 July Displaying the Routing Table NAT Multiple to One One to One NAT Multi-NAT 1740-A2-GB20-00 July Virtual Server Dhcp Dhcp ServerDhcp Relay DNS Proxy Igmp Click Apply to submit the settings Vlan Parameters and buttonsMaintenance and Diagnostics Software Upgrade and Configuration Backup /RestorationJuly 1740-A2-GB20-00 July OAM Loopback Ping Performance Monitoring 1740-A2-GB20-00 July Interface Application Example Adding the Static Route WebJuly Pin Assignments Line Port RJ45VT100 Compatible Terminal Console AccessConsole Port Cable Keyboard Operations July Motoring the Shdsl Line Status Retrieve the Factory Default Settings Disable the Web BrowserSave the Configurations July Appendix a Specifications Network functions Power SupplyEnvironmental Conditions