Paradyne 1740 SHDSL manual 1740-A2-GB20-00 July

Page 41

1740 SHDSL 2/4-Wire Router User’s Guide

Poison Reverse:

Enabled: to enable the Poison Reverse

Disabled: to enable the Splitting Horizon

The default setting of poison reverse parameter is Enabled.

It means the router adopts the split horizon with poison reverse scheme to avoid routing loop problems. If the parameter is disabled, the router will use the simple split horizon scheme to solve the problem.

Authentication Code: Enter the password for authentication.

Mode: Enabled

Auto Summary: Enabled, Disabled

The RIP function is now enabled. The default RIP parameter for each interface is RIPv2. In this default mode, this router can operate normally without other adjustments. If you want to configure advanced RIP functions, perform the procedures that follow.

Enter BASIC/ROUTING/RIP/INTERFACE/LAN to configure the parameters.

1740-A2-GB20-00

July 2004

41

Image 41

Contents Shdsl July 1740-A2-GB20-00 July Table of Contents Chapter Application Example Appendix a Specifications Application OverviewColor Mode Function LED IndicatorsPreparing for Hardware Installation InstallationAC power adapter Four-wire 8P8C straight-through RJ45 cableRear-panel Connections Power connectionDSL connection Ethernet connectionLogin Quick InstallationJuly Web Page Layout Monitoring the Shdsl Line WAN Interface Configuration VCI Bridge Mode Service for One Fixed IP Address1740-A2-GB20-00 July Router Mode Service for Five Static IP Addresses 1740-A2-GB20-00 July July 1740-A2-GB20-00 July PPPoE Shdsl 2/4-Wire Router User’s Guide PPPoA 1740-A2-GB20-00 July Password Setup Spanning Tree Protocol Setting the BridgeStatic Bridging Write System Configurations Load Factory Default Values LAN Interface Setting up WAN and LAN InterfacesConfiguring the WAN Interface VC Data Flow Control Setting up an ISP Snmp Enable SnmpDisable Snmp Add a Packet Filter entry Packet FilterDelete a Packet Filter entry Enable/Disable Packet FilterStatic Route RoutingAdd ModifySet Up the RIP function 1740-A2-GB20-00 July Displaying the Routing Table NAT Multiple to One One to One NAT Multi-NAT 1740-A2-GB20-00 July Virtual Server Dhcp Server DhcpDhcp Relay DNS Proxy Igmp Click Apply to submit the settings Parameters and buttons VlanSoftware Upgrade and Configuration Backup /Restoration Maintenance and DiagnosticsJuly 1740-A2-GB20-00 July OAM Loopback Ping Performance Monitoring 1740-A2-GB20-00 July Interface Adding the Static Route Web Application ExampleJuly Line Port RJ45 Pin AssignmentsConsole Port Cable Console AccessVT100 Compatible Terminal Keyboard Operations July Motoring the Shdsl Line Status Disable the Web Browser Retrieve the Factory Default SettingsSave the Configurations July Appendix a Specifications Environmental Conditions Power SupplyNetwork functions