Paradyne 1740 SHDSL manual Setting up an ISP

Page 34

1740 SHDSL 2/4-Wire Router User’s Guide

4.2.2Setting up an ISP

The router supports connection to up to 16 ISPs. Each ATM Interface can connect to an ISP.To set up or configure the connection parameters to ISP, click on WAN Configure on the Advanced menu bar. Click on the ISP tab on the main screen.

Select an ISP and click on the Modify button on the bottom screen. After modifying the parameters, click on OK to complete the settings.

34

July 2004

1740-A2-GB20-00

Image 34

Contents Shdsl July 1740-A2-GB20-00 July Table of Contents Chapter Application Example Appendix a Specifications Overview ApplicationLED Indicators Color Mode FunctionAC power adapter InstallationPreparing for Hardware Installation Four-wire 8P8C straight-through RJ45 cableDSL connection Power connectionRear-panel Connections Ethernet connectionQuick Installation LoginJuly Web Page Layout Monitoring the Shdsl Line WAN Interface Configuration Bridge Mode Service for One Fixed IP Address VCI1740-A2-GB20-00 July Router Mode Service for Five Static IP Addresses 1740-A2-GB20-00 July July 1740-A2-GB20-00 July PPPoE Shdsl 2/4-Wire Router User’s Guide PPPoA 1740-A2-GB20-00 July Password Setup Setting the Bridge Spanning Tree ProtocolStatic Bridging Write System Configurations Load Factory Default Values Setting up WAN and LAN Interfaces LAN InterfaceConfiguring the WAN Interface VC Data Flow Control Setting up an ISP Enable Snmp SnmpDisable Snmp Packet Filter Add a Packet Filter entryEnable/Disable Packet Filter Delete a Packet Filter entryAdd RoutingStatic Route ModifySet Up the RIP function 1740-A2-GB20-00 July Displaying the Routing Table NAT Multiple to One One to One NAT Multi-NAT 1740-A2-GB20-00 July Virtual Server Dhcp Dhcp ServerDhcp Relay DNS Proxy Igmp Click Apply to submit the settings Vlan Parameters and buttonsMaintenance and Diagnostics Software Upgrade and Configuration Backup /RestorationJuly 1740-A2-GB20-00 July OAM Loopback Ping Performance Monitoring 1740-A2-GB20-00 July Interface Application Example Adding the Static Route WebJuly Pin Assignments Line Port RJ45VT100 Compatible Terminal Console AccessConsole Port Cable Keyboard Operations July Motoring the Shdsl Line Status Retrieve the Factory Default Settings Disable the Web BrowserSave the Configurations July Appendix a Specifications Network functions Power SupplyEnvironmental Conditions