Paradyne 1740 SHDSL manual July

Page 56

1740 SHDSL 2/4-Wire Router User’s Guide

If a wrong format of the file us uploaded, a failure message will display during the upgrade. The following is an example of upgrade failure resulting from an incorrect file format.

Before performing the TFTP upgrade, run the TFTP software. Click on Utilities on the Advanced menu bar. Fill out the TFTP Server IP address, file name, and upgrade type.

Software upgrade: Check Download and choose Firmware in the column to the right.

Homepage upgrade: Check Download and choose Homepage in the column to the right.

Configuration backup: Check Upload and choose Configuration in the column to the right

Retrieving Configurations: Check Download and choose Configuration in the column to the right After completing the settings, click Apply to perform the function and note the following.

After software or homepage upgrades are complete, reboot the device to run the new file. After the configurations are retrieved, also write the configurations to the Flash memory.

The following is an example of how to set up the parameters for software upgrade.

56

July 2004

1740-A2-GB20-00

Image 56

Contents Shdsl July 1740-A2-GB20-00 July Table of Contents Chapter Application Example Appendix a Specifications Overview ApplicationLED Indicators Color Mode FunctionInstallation Preparing for Hardware InstallationAC power adapter Four-wire 8P8C straight-through RJ45 cablePower connection Rear-panel ConnectionsDSL connection Ethernet connectionQuick Installation LoginJuly Web Page Layout Monitoring the Shdsl Line WAN Interface Configuration Bridge Mode Service for One Fixed IP Address VCI1740-A2-GB20-00 July Router Mode Service for Five Static IP Addresses 1740-A2-GB20-00 July July 1740-A2-GB20-00 July PPPoE Shdsl 2/4-Wire Router User’s Guide PPPoA 1740-A2-GB20-00 July Password Setup Setting the Bridge Spanning Tree ProtocolStatic Bridging Write System Configurations Load Factory Default Values Setting up WAN and LAN Interfaces LAN InterfaceConfiguring the WAN Interface VC Data Flow Control Setting up an ISP Enable Snmp SnmpDisable Snmp Packet Filter Add a Packet Filter entryEnable/Disable Packet Filter Delete a Packet Filter entryRouting Static RouteAdd ModifySet Up the RIP function 1740-A2-GB20-00 July Displaying the Routing Table NAT Multiple to One One to One NAT Multi-NAT 1740-A2-GB20-00 July Virtual Server Dhcp Dhcp ServerDhcp Relay DNS Proxy Igmp Click Apply to submit the settings Vlan Parameters and buttonsMaintenance and Diagnostics Software Upgrade and Configuration Backup /RestorationJuly 1740-A2-GB20-00 July OAM Loopback Ping Performance Monitoring 1740-A2-GB20-00 July Interface Application Example Adding the Static Route WebJuly Pin Assignments Line Port RJ45Console Port Cable Console AccessVT100 Compatible Terminal Keyboard Operations July Motoring the Shdsl Line Status Retrieve the Factory Default Settings Disable the Web BrowserSave the Configurations July Appendix a Specifications Environmental Conditions Power SupplyNetwork functions