Paradyne 1740 SHDSL manual Router Mode Service for Five Static IP Addresses

Page 18

1740 SHDSL 2/4-Wire Router User’s Guide

3.2.2Router Mode: Service for Five Static IP Addresses

To set up the service for five static IP addresses, you need to set up the VC in RFC 1483 Routed mode.

STEP 1: Click WAN Setup on the Basic menu bar.

STEP 2: Enter values for: VPI, VCI, Encapsulation (LLC or VC MUX), Enable NAPT.

VPI	Enter a value for the vitual path identifier

VCI	Enter a value for the virtual channel identifier

LLCEncapsulation:	With LLC encapsulation, a link control header is added to the
	Ethernet packet that identifies the protocol type (Ethernet). This
	allows multiple protocols to be transmitted over the ATM Virtual
	Circuit.

VC Multiplexing:	With VC Multiplexing, no link control header is needed as the
	ATM Virtual Circuit is assumed to be carrying a single protocol.

Enable NAPT	Selecting Enabling NAPT will enable Network Port Address
	Translation on the WAN interface.

STEP 3: Click on the RFC 1483 Routed option.

18

July 2004

1740-A2-GB20-00

Image 18

Contents Shdsl July 1740-A2-GB20-00 July Table of Contents Chapter Application Example Appendix a Specifications Overview ApplicationLED Indicators Color Mode FunctionAC power adapter InstallationPreparing for Hardware Installation Four-wire 8P8C straight-through RJ45 cableDSL connection Power connectionRear-panel Connections Ethernet connectionQuick Installation LoginJuly Web Page Layout Monitoring the Shdsl Line WAN Interface Configuration Bridge Mode Service for One Fixed IP Address VCI1740-A2-GB20-00 July Router Mode Service for Five Static IP Addresses 1740-A2-GB20-00 July July 1740-A2-GB20-00 July PPPoE Shdsl 2/4-Wire Router User’s Guide PPPoA 1740-A2-GB20-00 July Password Setup Setting the Bridge Spanning Tree ProtocolStatic Bridging Write System Configurations Load Factory Default Values Setting up WAN and LAN Interfaces LAN InterfaceConfiguring the WAN Interface VC Data Flow Control Setting up an ISP Enable Snmp SnmpDisable Snmp Packet Filter Add a Packet Filter entryEnable/Disable Packet Filter Delete a Packet Filter entryAdd RoutingStatic Route ModifySet Up the RIP function 1740-A2-GB20-00 July Displaying the Routing Table NAT Multiple to One One to One NAT Multi-NAT 1740-A2-GB20-00 July Virtual Server Dhcp Dhcp ServerDhcp Relay DNS Proxy Igmp Click Apply to submit the settings Vlan Parameters and buttonsMaintenance and Diagnostics Software Upgrade and Configuration Backup /RestorationJuly 1740-A2-GB20-00 July OAM Loopback Ping Performance Monitoring 1740-A2-GB20-00 July Interface Application Example Adding the Static Route WebJuly Pin Assignments Line Port RJ45Console Access VT100 Compatible TerminalConsole Port Cable Keyboard Operations July Motoring the Shdsl Line Status Retrieve the Factory Default Settings Disable the Web BrowserSave the Configurations July Appendix a Specifications Power Supply Network functionsEnvironmental Conditions