Paradyne 1740 SHDSL manual Preparing for Hardware Installation, AC power adapter

Page 9

1740 SHDSL 2/4-Wire Router User’s Guide

CHAPTER 2 Installation

2.1Preparing for Hardware Installation

The following equipment may be necessary to install the router:

AC power adapter

A power adapter is shipped with the router.

LAN connection cable

To connect to the hub, use a straight-through RJ45 cable. To connect to a PC, use a crossover RJ45 cable.

Four-wire (8P8C) straight-through RJ45 cable

A four-wire (8P8C) straight through RJ45 cable is needed to connect to the LINE port to the wall outlet.

1740-A2-GB20-00

July 2004

9

Image 9

Contents Shdsl July 1740-A2-GB20-00 July Table of Contents Chapter Application Example Appendix a Specifications Application OverviewColor Mode Function LED IndicatorsPreparing for Hardware Installation InstallationAC power adapter Four-wire 8P8C straight-through RJ45 cableRear-panel Connections Power connectionDSL connection Ethernet connectionLogin Quick InstallationJuly Web Page Layout Monitoring the Shdsl Line WAN Interface Configuration VCI Bridge Mode Service for One Fixed IP Address1740-A2-GB20-00 July Router Mode Service for Five Static IP Addresses 1740-A2-GB20-00 July July 1740-A2-GB20-00 July PPPoE Shdsl 2/4-Wire Router User’s Guide PPPoA 1740-A2-GB20-00 July Password Setup Spanning Tree Protocol Setting the BridgeStatic Bridging Write System Configurations Load Factory Default Values LAN Interface Setting up WAN and LAN InterfacesConfiguring the WAN Interface VC Data Flow Control Setting up an ISP Snmp Enable SnmpDisable Snmp Add a Packet Filter entry Packet FilterDelete a Packet Filter entry Enable/Disable Packet FilterStatic Route RoutingAdd ModifySet Up the RIP function 1740-A2-GB20-00 July Displaying the Routing Table NAT Multiple to One One to One NAT Multi-NAT 1740-A2-GB20-00 July Virtual Server Dhcp Server DhcpDhcp Relay DNS Proxy Igmp Click Apply to submit the settings Parameters and buttons VlanSoftware Upgrade and Configuration Backup /Restoration Maintenance and DiagnosticsJuly 1740-A2-GB20-00 July OAM Loopback Ping Performance Monitoring 1740-A2-GB20-00 July Interface Adding the Static Route Web Application ExampleJuly Line Port RJ45 Pin AssignmentsConsole Access VT100 Compatible TerminalConsole Port Cable Keyboard Operations July Motoring the Shdsl Line Status Disable the Web Browser Retrieve the Factory Default SettingsSave the Configurations July Appendix a Specifications Power Supply Network functionsEnvironmental Conditions