Paradyne 1740 SHDSL manual Setting the Bridge, Spanning Tree Protocol

Page 27

1740 SHDSL 2/4-Wire Router User’s Guide

3.2.6Setting the Bridge

Click on Bridging on the Advanced menu bar to set up the static bridging and Spanning Tree Protocol (STP) functions.

3.3Spanning Tree Protocol

The STP function is disabled by factory default. To enable it, click Enable in the Spanning Tree field and configure the interfaces on the screen. When the parameters are set up, click Apply to submit the settings.

1740-A2-GB20-00

July 2004

27

Image 27

Contents Shdsl July 1740-A2-GB20-00 July Table of Contents Chapter Application Example Appendix a Specifications Application OverviewColor Mode Function LED IndicatorsFour-wire 8P8C straight-through RJ45 cable InstallationPreparing for Hardware Installation AC power adapterEthernet connection Power connectionRear-panel Connections DSL connectionLogin Quick InstallationJuly Web Page Layout Monitoring the Shdsl Line WAN Interface Configuration VCI Bridge Mode Service for One Fixed IP Address1740-A2-GB20-00 July Router Mode Service for Five Static IP Addresses 1740-A2-GB20-00 July July 1740-A2-GB20-00 July PPPoE Shdsl 2/4-Wire Router User’s Guide PPPoA 1740-A2-GB20-00 July Password Setup Spanning Tree Protocol Setting the BridgeStatic Bridging Write System Configurations Load Factory Default Values LAN Interface Setting up WAN and LAN InterfacesConfiguring the WAN Interface VC Data Flow Control Setting up an ISP Snmp Enable SnmpDisable Snmp Add a Packet Filter entry Packet FilterDelete a Packet Filter entry Enable/Disable Packet FilterModify RoutingStatic Route AddSet Up the RIP function 1740-A2-GB20-00 July Displaying the Routing Table NAT Multiple to One One to One NAT Multi-NAT 1740-A2-GB20-00 July Virtual Server Dhcp Server DhcpDhcp Relay DNS Proxy Igmp Click Apply to submit the settings Parameters and buttons VlanSoftware Upgrade and Configuration Backup /Restoration Maintenance and DiagnosticsJuly 1740-A2-GB20-00 July OAM Loopback Ping Performance Monitoring 1740-A2-GB20-00 July Interface Adding the Static Route Web Application ExampleJuly Line Port RJ45 Pin AssignmentsConsole Access VT100 Compatible TerminalConsole Port Cable Keyboard Operations July Motoring the Shdsl Line Status Disable the Web Browser Retrieve the Factory Default SettingsSave the Configurations July Appendix a Specifications Power Supply Network functionsEnvironmental Conditions