Paradyne 1740 SHDSL manual Keyboard Operations

Page 67

1740 SHDSL 2/4-Wire Router User’s Guide

16.1.2Keyboard Operations

In this table, the caret (^) denotes the Ctrl key.

The upward arrow key moves the cursor upward in the menu

^S

^X

^L

^T

^R

Q

Tab

The downward arrow key moves the cursor downward in the menu.

Returns to the previous menu. If you are in a leaf menu you may need to push ^S first (to save the information)

Skips to the next menu.

Hold down the Ctrl-S keys simultaneously to perform different actions such as Save, Add, Delete and Go.

In the leaf menu, hold down the Ctrl-X keys simultaneously to return to the previous menu.

Hold down the Ctrl-L keys simultaneously to return to the Home Menu.

Hold down the Ctrl-T keys simultaneously to reset the value or statistics counted.

Hold down the Ctrl-R keys simultaneously to refresh or restore the menu.

Press the Q key to stop certain actions, such as software downloading.

In the leaf menu, some configuration fields are marked TAB. It means you need to press the TAB key to scroll through and select the pre-defined options.

The following backup keys can be used if your software doesn’t support arrow keys:

^W

Moves the cursor upward [equal to the up arrow key]

 

^Z

Moves the cursor downward [equal to the down arrow key]

 

^A

Return to the previous screen [equal to the left arrow key]

 

^D

Enter the selected item [equal to the right arrow key]

 

1740-A2-GB20-00

July 2004

67

Image 67
Contents Shdsl July 1740-A2-GB20-00 July Table of Contents Chapter Application Example Appendix a Specifications Application OverviewColor Mode Function LED IndicatorsFour-wire 8P8C straight-through RJ45 cable InstallationPreparing for Hardware Installation AC power adapterEthernet connection Power connectionRear-panel Connections DSL connectionLogin Quick InstallationJuly Web Page Layout Monitoring the Shdsl Line WAN Interface Configuration VCI Bridge Mode Service for One Fixed IP Address1740-A2-GB20-00 July Router Mode Service for Five Static IP Addresses 1740-A2-GB20-00 July July 1740-A2-GB20-00 July PPPoE Shdsl 2/4-Wire Router User’s Guide PPPoA 1740-A2-GB20-00 July Password Setup Spanning Tree Protocol Setting the BridgeStatic Bridging Write System Configurations Load Factory Default Values LAN Interface Setting up WAN and LAN InterfacesConfiguring the WAN Interface VC Data Flow Control Setting up an ISP Snmp Enable SnmpDisable Snmp Add a Packet Filter entry Packet FilterDelete a Packet Filter entry Enable/Disable Packet FilterModify RoutingStatic Route AddSet Up the RIP function 1740-A2-GB20-00 July Displaying the Routing Table NAT Multiple to One One to One NAT Multi-NAT 1740-A2-GB20-00 July Virtual Server Dhcp Server DhcpDhcp Relay DNS Proxy Igmp Click Apply to submit the settings Parameters and buttons VlanSoftware Upgrade and Configuration Backup /Restoration Maintenance and DiagnosticsJuly 1740-A2-GB20-00 July OAM Loopback Ping Performance Monitoring 1740-A2-GB20-00 July Interface Adding the Static Route Web Application ExampleJuly Line Port RJ45 Pin AssignmentsVT100 Compatible Terminal Console AccessConsole Port Cable Keyboard Operations July Motoring the Shdsl Line Status Disable the Web Browser Retrieve the Factory Default SettingsSave the Configurations July Appendix a Specifications Network functions Power SupplyEnvironmental Conditions