ZyXEL Communications AES-100 Snmp Trap Configuration, Snmp Access Delete command, Supported Traps

Page 49

AES-100 User’s Guide

access <read write> <community> [<IP addr>]

where

<read write> = <community> = [<IP addr>] =

Specifies read-only/read-write permission.

Password needed to access the SNMP agent on the AES-100.

Optional IP address of the allowed SNMP manager.

This command allows read-only or read-write access. If the IP address is specified, access is allowed for the manager station with that address only.

8.3.2SNMP Access Delete command

Syntax:

access delete <community> [<IP addr>]

This command revokes SNMP access by the specified community (password). If the IP address is specified, access is denied for that manager station only.

8.3.3SNMP Access Flush Command

Syntax:

access flush

This command revokes access by any and all manager stations.

8.3.4SNMP Access List Command

Syntax:

access list

This command shows the allowed access.

8.4SNMP Trap Configuration

The AES-100 uses the SNMP trapping facility to proactively report unusual events to one or more trap servers. To configure the trap parameters, use the trap commands in the SNMP subsystem. After configuring the SNMP trap parameters, save the configuration to the nonvolatile memory with the config save command.

8.4.1Supported Traps

AES-100 supports the following traps

Remote Management

8-3

Image 49

Contents AES-100 Copyright ZyXEL Limited Warranty Interference Statements and Warnings Customer Support Table of Contents Table of Contents Vii Viii Table of Contents List of Figures 11-4 Preface Chapter Getting to Know the AES-100 FeaturesProtocol MTU Application BenefitsISP Application Physical SpecificationsCompact Design for Limited Space Scalable Platform for Future ExpansionDimensions Page Chapter Hardware Overview Additional Installation RequirementsUnpacking the AES-100 Front PanelFront Panel Ports Console PortFront Panel LEDs Rear Panel Adsl Port ConnectionsConnecting the Power Cord to the AES-100 and a Power Source Command Line Interface Chapter Software ConfigurationConsole Connection System Commands Command StructureUptime Command Version CommandPasswd Command Restart CommandConfig Print Command Config Save CommandPage Configured Vs. Actual Speed Chapter Adsl ConfigurationDefault Settings Adsl StandardsDisable Port Command Adsl CommandsDisable Ports Command Enable Ports Command Enable Port CommandLinedata Command Lineinfo Command Lineperf Command List Port Command Linerate CommandSet Port Command List Ports CommandSet Ports Command Show Ports Command Show Port CommandEthernet Commands Mbps Ethernet Port ConfigurationSet Duplex Command Status CommandMbps Ethernet Port Configuration Default Settings of Port-Based Vlan Chapter Bridge ConfigurationBridge Port Numbers Port-Based VlanDevice Command Bridge CommandsFilter Command Filterage CommandFlush Command Port-Based Vlan CommandsInfo Command Portfilter CommandBridge Bridge portfilter 2 1 Bridge portfilter 3 1 Example of Modified Vlan Port Example of Modified Vlan Settings Setting the IP Address Chapter IP ConfigurationConfig Command General IP CommandsStatistics Command Ping CommandPage Management by Telnet Chapter Remote ManagementSnmp Management Snmp Access Read/Write Command Snmp Access ConfigurationSupported MIBs Snmp Access Delete command Snmp Trap ConfigurationSnmp Access Flush Command Snmp Access List CommandAES-100 User’s Guide Trap Delete Command Trap Add CommandTrap Flush Command Trap List CommandPage Configuration Files of the AES-100 Chapter Configuration Backup/RestoreControl Files Used In Tftp Operation Configuration Restore Configuration BackupProcess, used only in restoration Page Chapter Firmware Upload BOOTP/TFTP Firmware Update of the AES-100BOOTP/TFTP Server Input MAC Database Edit Dialog Transfer control files and firmware file to the AES-100 Tftp Firmware Update on the AES-100Page Adsl LEDs Chapter TroubleshootingData Transmission Adsl LEDs turn On and Off Configured SettingsData Rate Remote Server PasswordSnmp Telnet Troubleshooting TelnetIndex Rear Panel Connections Terminal Emulation