ZyXEL Communications AES-100 manual Trap Add Command, Trap Delete Command, Trap Flush Command

AES-100 User’s Guide

8.4.2Trap Add Command

Syntax:

trap add <community> <IP addr> [<port>]

where
<community> =	The password used by the AES-100 to authenticate itself to the trap server.
<IP addr> =	The IP address of the trap server.
[<Port>] =	The optional port parameter is for specifying the UDP port number on the
	server in case it is different from the default of port 162.

This command adds a trap server.

8.4.3Trap Delete Command

Syntax:

trap delete <community> <IP addr> [<port>]

This command deletes a trap destination. The parameters are the same as the trap add command.

8.4.4Trap Flush Command

Syntax:

trap flush

This command deletes all trap destinations.

8.4.5Trap List Command

Syntax:

trap list

This command lists all the trap destinations.

Remote Management 8-5