-Enable/Disable State: disabled
-Maximum upstream speed: 512 Kbps
-Maximum downstream speed: 2048 Kbps
-Operational mode: auto
4.4ADSL Commands
4.4.1Config Save Command
Syntax:
config save
The config save command saves the ADSL configuration into nonvolatile memory.
4.4.2Disable Port Command
Syntax:
disable port <port number>
where
<port number> = port number, from 1 to 8
The disable port command forcibly disables the specified ADSL port.
The factory default of all ports is disabled. A port must be enabled before data transmission can occur. An enabled but disconnected ADSL port generates more heat than an operating port. To minimize heat generation and to enhance reliability, remember to disable a port when it is not in use.
4.4.3Disable Ports Command
Syntax:
disable ports
The disable ports command forcibly disables all ADSL ports.
The factory default of all ports is disabled. A port must be enabled before data transmission can occur. An enabled but disconnected ADSL port generates more heat than an operating port. To minimize heat generation and to enhance reliability, remember to disable a port when it is not in use.
ADSL Configuration |