Kramer Electronics PL-150 user manual Connecting via a Straight-Through Cable

Page 14

Connecting the PL-50 Power Controller - Monitor

5.Select the Internet Protocol (TCP/IP) and click the Properties button (see Figure 6).

Figure 6: Local Area Connection Properties Window

6.Select Use the following IP address, and fill in the details as shown in Figure 7.

7.Click OK.

Figure 7: Internet Protocol (TCP/IP) Properties Window

6.2.2Connecting via a Straight-Through Cable

You can connect the ETHERNET of the PL-50to the Ethernet port on a network hub or network router, via a straight-through cable with RJ-45 connectors.

10	KRAMER: SIMPLE CREATIVE TECHNOLOGY

Image 14

Contents Model Contents Figures Instruction Codes43Tables P3K Wizard Software IntroductionGetting Started Quick StartGetting Started Overview EthernetYour PL-50 Power Controller Monitor Your PL-50 Power Controller MonitorPL-50 Power Controller Monitor Front Panel PL-50 Power Controller Monitor Features Feature FunctionInstalling in a Rack Before Installing in a RackConnecting the PL-50 Power Controller Monitor Connecting the PL-50Right-click Local Area Connection Properties Connecting the RelaysControlling the PL-50 via the Ethernet Port Local Area Connection Properties window appearsConnecting via a Straight-Through Cable Click the Connect button Connect screen appears as follows Upload Main ScreenIf required, make changes and click Save. If not, click Exit Controlling via the Embedded Web Pages Following window appearsRunning the Application Panel Screen Scheduler Screen Features Scheduler ScreenHelp BOX Define the Channel Settings screen Channel Settings Screen FeaturesAlerts Screen Features Define the Alerts screenSetting the Alarms Define the Power Measurement screen Power Measurement Screen FeaturesPower ON/OFF Order Screen This page lets you set the power on and OFF order and delay Configurations Screen Enable Security System Security System EnabledSecurity System DIP-switch Definitions Operating Your PL-50 Power Controller MonitorDIP-switch Settings Calibrating via the Front Panel ButtonsOperating Your PL-50 Power Controller Monitor Flash Memory Upgrade Upgrading the FirmwareClick the Connect button Connect Window appears see Figure Upload ScreenMachine is now connected Connection Time Out MessageUpload Connected Upload Progress When the update is finished, the restart message appears Restart MessageTechnical Specifications1 of the PL-50 Technical SpecificationsIncludes the technical specifications Changing the Device ParametersHost message format Kramer ProtocolProtocol 3000 Syntax CR LFCommand Terms CommandCommon Commands NAME? FactoryName NAME? NameResult and Error Codes Security CommandsNetwork Setting Commands These commands are used by network devices running ProtocolNET-GATE NET-DHCPNET-DHCP? NET-GATE?Instruction Codes ALARM-ON Result ALARM-ON? ALARM-OFFALARM-ON ALARM-START-ASLVL SwitchMES-MODE SCHED?SWITCH-ORDER-DELAY SWITCH?SWITCH-ORDER SWITCH-ORDER-DELAY?Limited Warranty 2900-000576 REV