Kramer Electronics PL-150 user manual Security System

Page 30

Connecting the PL-50 Power Controller - Monitor

6.3.8.1The Security System

Set the user password and Admin password1 (by default, the passwords for both User and Admin are empty fields).

The security system includes three levels of security:

•Pre-authorized mode (the security box is checked) – the Web pages are disabled and you have to enter either the User or Admin password to access the system (see Figure 28)

•User mode – monitor the system and switch outlets ON or OFF

•Admin mode – control the system and change any of the parameters

Figure 28: User Login

At any time you can log out by clicking the Log Out button on the top right side of the Web page (see Figure 27).

HELP BOX

Please log in as USER or ADMIN.

1 Both the Admin and the User passwords are reset to their default values when pressing the reset button located on the rear panel of the machine (see Figure 2 and Figure 3) and plugging the power ON while pressing

26	KRAMER: SIMPLE CREATIVE TECHNOLOGY

Image 30

Contents Model Contents Figures Instruction Codes43Tables P3K Wizard Software IntroductionGetting Started Quick StartGetting Started Overview EthernetYour PL-50 Power Controller Monitor Your PL-50 Power Controller MonitorPL-50 Power Controller Monitor Front Panel PL-50 Power Controller Monitor Features Feature FunctionInstalling in a Rack Before Installing in a RackConnecting the PL-50 Power Controller Monitor Connecting the PL-50Right-click Local Area Connection Properties Connecting the RelaysControlling the PL-50 via the Ethernet Port Local Area Connection Properties window appearsConnecting via a Straight-Through Cable Click the Connect button Connect screen appears as follows Upload Main ScreenIf required, make changes and click Save. If not, click Exit Controlling via the Embedded Web Pages Following window appearsRunning the Application Panel Screen Scheduler Screen Features Scheduler ScreenHelp BOX Define the Channel Settings screen Channel Settings Screen FeaturesAlerts Screen Features Define the Alerts screenSetting the Alarms Define the Power Measurement screen Power Measurement Screen FeaturesPower ON/OFF Order Screen This page lets you set the power on and OFF order and delay Configurations Screen Enable Security System Security System EnabledSecurity System DIP-switch Definitions Operating Your PL-50 Power Controller MonitorDIP-switch Settings Calibrating via the Front Panel ButtonsOperating Your PL-50 Power Controller Monitor Flash Memory Upgrade Upgrading the FirmwareClick the Connect button Connect Window appears see Figure Upload ScreenMachine is now connected Connection Time Out MessageUpload Connected Upload Progress When the update is finished, the restart message appears Restart MessageTechnical Specifications1 of the PL-50 Technical SpecificationsIncludes the technical specifications Changing the Device ParametersHost message format Kramer ProtocolProtocol 3000 Syntax CR LFCommand Terms CommandCommon Commands NAME? FactoryName NAME? NameResult and Error Codes Security CommandsNetwork Setting Commands These commands are used by network devices running ProtocolNET-GATE NET-DHCPNET-DHCP? NET-GATE?Instruction Codes ALARM-ON Result ALARM-ON? ALARM-OFFALARM-ON ALARM-START-ASLVL SwitchMES-MODE SCHED?SWITCH-ORDER-DELAY SWITCH?SWITCH-ORDER SWITCH-ORDER-DELAY?Limited Warranty 2900-000576 REV