Kramer Electronics PL-150 user manual Define the Alerts screen, Alerts Screen Features

Connecting the PL-50 Power Controller - Monitor

6.3.5The Alerts Screen

Figure 19 and Table 6 define the Alerts screen:

		Figure 19: The Alerts Screen
		Table 6: The Alerts Screen Features
	Feature	Function
Alert Triggers:		Select the event that will trigger an alarm:
		Check the Enable box to enable the event and action taken or clear to disable
		The events:
		TO OFF – the outlet turns OFF (the channel button is off)
		TO ON – the outlet turns ON (the channel button is on)
		TO ACTIVE – the green LED is ON
		TO STANDBY – the orange LED is ON
		TO NONE – the outlet is disconnected
		ANY CHANGE – any change in the current status
		Read: click to read the data stored in the machine
		Submit: click to submit changes
Alarm		Relay Starts As: set the relay status to closed or open according to the relay
configuration:		installation. For example, if the alarm is installed so that in the closed state the
		alarm is off set it to Closed
		Duration: set the duration of the alarm in seconds
		Test Alarm: click this button to test the alarm, click again to silence it
		An alarm icon appears on the top right side of the screen. Stop the alarm by
		clicking the Alarm icon (see Figure 20)
		Read: click to read the data stored in the machine
		Submit: click to submit changes
		19