Kramer Electronics PL-150 user manual Instruction Codes

Page 47

Kramer Protocol 3000

NET-MAC?

Cmd Short		Description		Command Type			Permission
NTMC?		Read MAC address		Ethernet			End User
Usage:
Syntax				Response
NET-MAC?				NET-MAC
NET-MAC?				NET-MAC	MAC_ADDRESS

NET-MASK
Cmd Short		Description		Command Type			Permission
NTMSK		Set subnet mask		Ethernet			Administrator
Usage:
Syntax				Response
NET-MASK				NET-MASK
NET-MASK	SUBNET_MASK			NET-MASK		SUBNET_MASK				RESULT
Ex: 255.255.000.000
NET-MASK?
Cmd Short		Description		Command Type			Permission
NTMSK?		Get subnet mask		Ethernet			End User
Usage:
Syntax				Response
NET-MASK?				NET-MASK
NET-MASK?				NET-MASK		SUBNET_MASK

10.7Instruction Codes

ALARM

Cmd Short

Description

Command Type

Permission

Device notification

PL-50

No security

Usage:

Syntax

Response

ALARM 1/0

1/0= On OR Off

ALARM-DURATION

Cmd Short

Description

Command Type

Permission

Set alarm duration

PL-50

Administrator

Usage:

Syntax

Response

ALARM-DURATION

ALARM-DURATION

SECONDS

SECONDS

RESULT

SECONDS

= 0–255

ALARM-DURATION?

Cmd Short

Description

Command Type

Permission

Query alarm duration

PL-50

User

Usage:

Syntax

Response

ALARM-DURATION?

ALARM-DURATION

SECONDS

43

Image 47

Contents Model Contents Instruction Codes43 FiguresTables Quick Start IntroductionGetting Started P3K Wizard SoftwareGetting Started Ethernet OverviewYour PL-50 Power Controller Monitor Your PL-50 Power Controller MonitorPL-50 Power Controller Monitor Front Panel Feature Function PL-50 Power Controller Monitor FeaturesBefore Installing in a Rack Installing in a RackConnecting the PL-50 Connecting the PL-50 Power Controller MonitorLocal Area Connection Properties window appears Connecting the RelaysControlling the PL-50 via the Ethernet Port Right-click Local Area Connection PropertiesConnecting via a Straight-Through Cable Upload Main Screen Click the Connect button Connect screen appears as followsIf required, make changes and click Save. If not, click Exit Following window appears Controlling via the Embedded Web PagesRunning the Application Panel Screen Scheduler Screen Scheduler Screen FeaturesHelp BOX Channel Settings Screen Features Define the Channel Settings screenDefine the Alerts screen Alerts Screen FeaturesSetting the Alarms Power Measurement Screen Features Define the Power Measurement screenPower ON/OFF Order Screen This page lets you set the power on and OFF order and delay Configurations Screen Security System Enabled Enable Security SystemSecurity System Calibrating via the Front Panel Buttons Operating Your PL-50 Power Controller MonitorDIP-switch Settings DIP-switch DefinitionsOperating Your PL-50 Power Controller Monitor Upgrading the Firmware Flash Memory UpgradeUpload Screen Click the Connect button Connect Window appears see FigureConnection Time Out Message Machine is now connectedUpload Connected Upload Progress Restart Message When the update is finished, the restart message appearsChanging the Device Parameters Technical SpecificationsIncludes the technical specifications Technical Specifications1 of the PL-50CR LF Kramer ProtocolProtocol 3000 Syntax Host message formatCommand Command TermsCommon Commands NAME? Name FactoryName NAME?Security Commands Result and Error CodesThese commands are used by network devices running Protocol Network Setting CommandsNET-GATE? NET-DHCPNET-DHCP? NET-GATEInstruction Codes ALARM-START-AS ALARM-OFFALARM-ON ALARM-ON Result ALARM-ON?SCHED? SwitchMES-MODE LVLSWITCH-ORDER-DELAY? SWITCH?SWITCH-ORDER SWITCH-ORDER-DELAYLimited Warranty 2900-000576 REV