Kramer Electronics PL-150 user manual This page lets you set the power on and OFF order and delay

Connecting the PL-50 Power Controller - Monitor

In the example illustrated in Figure 23, the Power OFF Order is set from 5 to 1 with a 10 second delay time before each channel in the sequence is switched OFF:

Figure 23: Power ON Order Example

The system switches ON according to the Power ON Order, with a 1 second delay before powering ON each channel:

	1sec		1sec		1sec		1sec
Power ON	Delay	Power ON	Delay	Power ON	Delay	Power ON	Delay	Power ON
Channel 5		Channel 3		Channel 1		Channel 2		Channel 4

Figure 24: Switching ON Sequence Example

If an outlet is not connected, the sequence skips over that channel (and its switching delay time as well) and continues to the next channel in the sequence.

HELP BOX

This page lets you set the power ON and OFF order and delay.

23