Kramer Electronics PL-150 user manual Panel Screen

Page 19

Connecting the PL-50 Power Controller - Monitor

6.3.2The Panel Screen

The Panel screen lets you select one or more channels in order to read the Standby or Active values and turn the power outlet ON/OFF:

Figure 14: HOME Embedded Web Page

The connection icon on the top right screen indicates whether the machine is

connected to your PC or not . Click the on-screen channel buttons:

1

2

3

4

5

Figure 15: Selecting a Channel

Each channel button includes red and green indicators. If the indicators appear bright, the Standby or Active values are measured (channel 3 in the example in Figure 15). Otherwise, these values were not measured.

The Help Box

This is the main panel window. In this window you can control the channels.

15

Image 19

Contents Model Contents Instruction Codes43 FiguresTables Quick Start IntroductionGetting Started P3K Wizard SoftwareGetting Started Ethernet OverviewYour PL-50 Power Controller Monitor Your PL-50 Power Controller MonitorPL-50 Power Controller Monitor Front Panel Feature Function PL-50 Power Controller Monitor FeaturesBefore Installing in a Rack Installing in a RackConnecting the PL-50 Connecting the PL-50 Power Controller MonitorLocal Area Connection Properties window appears Connecting the RelaysControlling the PL-50 via the Ethernet Port Right-click Local Area Connection PropertiesConnecting via a Straight-Through Cable Upload Main Screen Click the Connect button Connect screen appears as followsIf required, make changes and click Save. If not, click Exit Following window appears Controlling via the Embedded Web PagesRunning the Application Panel Screen Scheduler Screen Scheduler Screen FeaturesHelp BOX Channel Settings Screen Features Define the Channel Settings screenDefine the Alerts screen Alerts Screen FeaturesSetting the Alarms Power Measurement Screen Features Define the Power Measurement screenPower ON/OFF Order Screen This page lets you set the power on and OFF order and delay Configurations Screen Security System Enabled Enable Security SystemSecurity System Calibrating via the Front Panel Buttons Operating Your PL-50 Power Controller MonitorDIP-switch Settings DIP-switch DefinitionsOperating Your PL-50 Power Controller Monitor Upgrading the Firmware Flash Memory UpgradeUpload Screen Click the Connect button Connect Window appears see FigureConnection Time Out Message Machine is now connectedUpload Connected Upload Progress Restart Message When the update is finished, the restart message appearsChanging the Device Parameters Technical SpecificationsIncludes the technical specifications Technical Specifications1 of the PL-50CR LF Kramer ProtocolProtocol 3000 Syntax Host message formatCommand Command TermsCommon Commands NAME? Name FactoryName NAME?Security Commands Result and Error CodesThese commands are used by network devices running Protocol Network Setting CommandsNET-GATE? NET-DHCPNET-DHCP? NET-GATEInstruction Codes ALARM-START-AS ALARM-OFFALARM-ON ALARM-ON Result ALARM-ON?SCHED? SwitchMES-MODE LVLSWITCH-ORDER-DELAY? SWITCH?SWITCH-ORDER SWITCH-ORDER-DELAYLimited Warranty 2900-000576 REV