Kramer Electronics PL-150 user manual Network Setting Commands

Kramer Protocol 3000

PASS

Cmd Short			Description	Command Type					Permission
			Set password	Security					Administrator
Usage:
Syntax				Response
PASS ID ,				PASS ID ,
		PASS				PASS	RESULT
PASS?
Cmd Short			Description	Command Type					Permission
			Query password	Security					Administrator
Usage:
Syntax				Response
PASS? ID				PASS ID ,
						PASS	RESULT
SECUR
Cmd Short			Description	Command Type					Permission
			Start/Stop Security	Security					Administrator
Usage:
Syntax				Response
SECUR				SECUR
	ON/OFF				ON/OFF			RESULT
ON/OFF = 0 or OFF, 1 or ON
SECUR?
Cmd Short			Description	Command Type					Permission
			Query Start/Stop Security	Security					No Security
Usage:
Syntax				Response
SECUR?				SECUR
					ON/OFF

10.6Network Setting Commands

These commands are used by network devices running Protocol 3000.

ETH-PORT

Cmd Short				Description		Command Type			Permission
ETHP				Change protocol Ethernet port		Ethernet			Administrator
Usage:
Syntax						Response
ETH-PORT				,		ETH-PORT
	PROTOCOL				PORT		PROTOCOL			,PORT	RESULT
ETH-PORT?
Cmd Short				Description		Command Type				Permission
ETHP?				Get protocol Ethernet port		Ethernet			End User
Usage:
Syntax						Response
ETH-PORT?						ETH-PORT		,
			PROTOCOL				PROTOCOL			PORT
		= TCP/UDP (transport layer protocol)
PROTOCOL

PORT = Ethernet port that accepts Protocol 3000 commands 1-65535 = User defined port

41