Compaq CP-2E manual Internet, Timezone Setup

Page 51

Advanced Setup Icons

Timezone Setup

For a full discussion of the Timezone setup, please refer to Chapter 2.

Internet

For a full discussion of the Internet Connection method setup, please refer to Chapter 2.

LAN

The LAN page allows you to adjust the TCP/IP settings of the Connection Point CP-2E.

The default network IP address of the Connection Point CP-2E is 192.168.1.1. This IP address is also the default gateway and DNS server that local clients use to access the Internet, leaving 253 IP addresses to be assigned to LAN computers by the DHCP server.

You can change the IP address of the LAN interface on the Connection Point CP-2E. You can also change the subnet mask, but if you do, you must ensure that the new subnet includes the addresses your DHCP server uses.

Note: If you choose a LAN interface subnet that doesn't include the current range of the DHCP server, the DHCP server is automatically disabled. The current DHCP server range is listed at the bottom of the page (DHCP Start Address and DHCP End Address).

MAC Address: Displays the Ethernet Media Access Control (MAC) address of the LAN interface on the Connection Point CP-2E. It is expressed in six 2-digit hexadecimal number pairs (set at the factory) and cannot be changed.

LAN IP Address: Displays the current IP address assigned to the LAN interface on the Connection Point CP-2E. The IP address is written in dotted decimal notation (four octets separated by decimal points). This IP address serves as the DNS server/relay and the default gateway for computers on the local network.

5–4

iPAQ Connection Point CP-2E User Guide

Image 51
Contents Compaq iPAQ Page Page Contents Connection Point CP-2E Home System Recovery Page Share a Single High-Speed Internet Connection IntroductionSecurity and Advanced Management Ethernet NetworkingIntroduction What Else Do I Need? Description Significance Whats in Front?Description Function Whats in Back?Installation Installation and ConfigurationConnecting to Your PC Connecting to the InternetClient PC Configuration Powering UpConfiguring Windows 98 and ME Clients Installation and Configuration Click the Obtain an IP address automatically radio button Setting Up Connection Point CP-2E Using the Installation WizardChoosing the Internet Connection Method Dynamic Internet IP Static Internet IP Configuring Dynamic Internet IPPPPoE Configuring Static Internet IPConfiguring PPPoE Timezone Setup Administrator Password Settings Confirming Successful Setup Installing the Firmware Update Utility Registering the Connection Point CP-2E Adding PCs To Your Network Ethernet PCsAdding Ethernet PCs Configuring the Client Windows XP ConfigurationAdding PCs To Your Network Adding PCs To Your Network Windows 2000 Configuration Adding PCs To Your Network Adding PCs To Your Network Windows NT4.0 Configuration Adding PCs To Your Network Page Home Page Information Bar Connection Point CP-2E HomeGeneral Information Quick Setup IconManagement Icons System Info IconLAN Status Internet Status Network Information Event Log Help/Troubleshooting Icon Firmware Update IconRenew Internet IP Icon Page Advanced Setup Icons System SettingsPassword Resetting to Factory Default Advanced Setup Icons Internet Timezone SetupChanging the Subnet Click Network Computer List MAC SpoofingDesignating a DMZ Host DMZVirtual Server Adding a Virtual Server Packet Filtering Enabling Packet Filtering Adding an IP Rule Adding Port Rules Dhcp Reserved IP Table Changing Dhcp Server SettingsAdding a Reserved IP Address Excluded IP Addresses Adding an Excluded IP Address Adding a Bootp IP Address Bootpip TableAdvanced Setup Icons Adding a Static Route Static Routing TableAdvanced Setup Icons Smtp Advanced Setup Icons Using the Firmware Update Utility System RecoveryRestore Factory Defaults Solution TroubleshootingCannot Network cables Icon. Then, Renew Internet IP \\computername or \\PC IP Regulatory Compliance ModificationsCables Regulatory Compliance NAT NTP Smtp Appendix a SpecificationsPage For Windows XP Appendix B MAC Address Manual IdentificationFor Windows 98 and ME PCs For Windows 2000 PCs Accessing Security Configuration OptionsPage Glossary IPAQ Connection Point CP-2E User Guide Glossary Glossary Glossary