Compaq CP-2E manual Changing the Subnet

Page 52

Advanced Setup Icons

Subnet Mask: Displays the subnet mask that determines which parts of the IP address are used in the packet routing process. The default subnet mask of the LAN interface on the Connection Point CP-2E is 255.255.255.0. The first three octets of the subnet mask are unchangeable. A zero entry for the fourth octet defines a full Class C local network. You can scale the network down from a full Class C by entering a number other than zero in the fourth octet in the mask.

Changing the Subnet

1. Click the LAN link at the left. The LAN page is displayed.

2.To change the IP address of the LAN interface, type new octets into the LAN IP Address field.

3.To change the subnet mask, type new octets into the Subnet Mask field.

4.Click Apply. The Connection Point CP-2E must be rebooted for applied changes to take effect.

5.Click OK. You can reboot the Connection Point CP-2E at any time by clicking the Reboot button at the left.

iPAQ Connection Point CP-2E User Guide

5–5

Image 52

Contents Compaq iPAQ Page Page Contents Connection Point CP-2E Home System Recovery Page Introduction Share a Single High-Speed Internet ConnectionEthernet Networking Security and Advanced ManagementIntroduction What Else Do I Need? Whats in Front? Description SignificanceWhats in Back? Description FunctionInstallation and Configuration InstallationConnecting to the Internet Connecting to Your PCPowering Up Client PC ConfigurationConfiguring Windows 98 and ME Clients Installation and Configuration Click the Obtain an IP address automatically radio button Using the Installation Wizard Setting Up Connection Point CP-2EChoosing the Internet Connection Method Dynamic Internet IP Configuring Dynamic Internet IP Static Internet IPConfiguring Static Internet IP PPPoEConfiguring PPPoE Timezone Setup Administrator Password Settings Confirming Successful Setup Installing the Firmware Update Utility Registering the Connection Point CP-2E Ethernet PCs Adding PCs To Your NetworkAdding Ethernet PCs Windows XP Configuration Configuring the ClientAdding PCs To Your Network Adding PCs To Your Network Windows 2000 Configuration Adding PCs To Your Network Adding PCs To Your Network Windows NT4.0 Configuration Adding PCs To Your Network Page Connection Point CP-2E Home Home Page Information BarQuick Setup Icon Management IconsSystem Info Icon General InformationLAN Status Internet Status Network Information Event Log Firmware Update Icon Help/Troubleshooting IconRenew Internet IP Icon Page System Settings Advanced Setup IconsPassword Resetting to Factory Default Advanced Setup Icons Timezone Setup InternetChanging the Subnet MAC Spoofing Click Network Computer ListDMZ Designating a DMZ HostVirtual Server Adding a Virtual Server Packet Filtering Enabling Packet Filtering Adding an IP Rule Adding Port Rules Dhcp Changing Dhcp Server Settings Reserved IP TableAdding a Reserved IP Address Excluded IP Addresses Adding an Excluded IP Address Bootpip Table Adding a Bootp IP AddressAdvanced Setup Icons Static Routing Table Adding a Static RouteAdvanced Setup Icons Smtp Advanced Setup Icons System Recovery Using the Firmware Update UtilityRestore Factory Defaults Troubleshooting SolutionCannot Network cables Icon. Then, Renew Internet IP \\computername or \\PC IP Modifications Regulatory ComplianceCables Regulatory Compliance Appendix a Specifications NAT NTP SmtpPage Appendix B MAC Address Manual Identification For Windows XPFor Windows 98 and ME PCs Accessing Security Configuration Options For Windows 2000 PCsPage Glossary IPAQ Connection Point CP-2E User Guide Glossary Glossary Glossary