Compaq CP-2E manual Configuring Static Internet IP, PPPoE

Page 23

Installation and Configuration

Configuring Static Internet IP

1. Click the Static IP. The Static Internet IP page is displayed.

2.Type the static IP address provided by your ISP into the Internet IP Address field.

3.Type the subnet mask provided by your ISP into the Subnet Mask field.

4.Type the IP address of the default gateway provided by your ISP into the Default Gateway field.

5.Type the IP address of a primary DNS server provided by your ISP into the DNS Server 1 field. If an address for a secondary DNS server is provided, type that into the DNS Server 2 field.

6.Click Next. The Reboot dialog box is displayed. The Connection Point CP-2E must be rebooted for applied changes to take effect.

PPPoE

This setting configures your Connection Point CP-2E to connect to a DSL service using PPPoE. A PPPoE password is provided by your ISP.

2–10	iPAQ Connection Point CP-2E User Guide

Image 23

Contents Compaq iPAQ Page Page Contents Connection Point CP-2E Home System Recovery Page Share a Single High-Speed Internet Connection IntroductionSecurity and Advanced Management Ethernet NetworkingIntroduction What Else Do I Need? Description Significance Whats in Front?Description Function Whats in Back?Installation Installation and ConfigurationConnecting to Your PC Connecting to the InternetClient PC Configuration Powering UpConfiguring Windows 98 and ME Clients Installation and Configuration Click the Obtain an IP address automatically radio button Choosing the Internet Connection Method Setting Up Connection Point CP-2EUsing the Installation Wizard Dynamic Internet IP Static Internet IP Configuring Dynamic Internet IPPPPoE Configuring Static Internet IPConfiguring PPPoE Timezone Setup Administrator Password Settings Confirming Successful Setup Installing the Firmware Update Utility Registering the Connection Point CP-2E Adding Ethernet PCs Adding PCs To Your NetworkEthernet PCs Configuring the Client Windows XP ConfigurationAdding PCs To Your Network Adding PCs To Your Network Windows 2000 Configuration Adding PCs To Your Network Adding PCs To Your Network Windows NT4.0 Configuration Adding PCs To Your Network Page Home Page Information Bar Connection Point CP-2E HomeGeneral Information Quick Setup IconManagement Icons System Info IconLAN Status Internet Status Network Information Event Log Renew Internet IP Icon Help/Troubleshooting IconFirmware Update Icon Page Password Advanced Setup IconsSystem Settings Resetting to Factory Default Advanced Setup Icons Internet Timezone SetupChanging the Subnet Click Network Computer List MAC SpoofingDesignating a DMZ Host DMZVirtual Server Adding a Virtual Server Packet Filtering Enabling Packet Filtering Adding an IP Rule Adding Port Rules Dhcp Reserved IP Table Changing Dhcp Server SettingsAdding a Reserved IP Address Excluded IP Addresses Adding an Excluded IP Address Adding a Bootp IP Address Bootpip TableAdvanced Setup Icons Adding a Static Route Static Routing TableAdvanced Setup Icons Smtp Advanced Setup Icons Using the Firmware Update Utility System RecoveryRestore Factory Defaults Solution TroubleshootingCannot Network cables Icon. Then, Renew Internet IP \\computername or \\PC IP Cables Regulatory ComplianceModifications Regulatory Compliance NAT NTP Smtp Appendix a SpecificationsPage For Windows XP Appendix B MAC Address Manual IdentificationFor Windows 98 and ME PCs For Windows 2000 PCs Accessing Security Configuration OptionsPage Glossary IPAQ Connection Point CP-2E User Guide Glossary Glossary Glossary