Compaq CP-2E manual Enabling Packet Filtering

Page 58

Advanced Setup Icons

IP Rules: The IP Rules Status page shows destination IP addresses that are blocked. Packets that have destinations matching any of these addresses are discarded.

Port Rules: The Port Rules page displays port and protocol combinations that are blocked. Packets of the matching port number and protocol type are discarded. You can add new port/protocol filtering combinations. Several predefined port mappings are included.

Enabling Packet Filtering

1.Click the Packet Filtering link at the left. The Packet Filtering page is displayed.

2.Use the pulldown menu to select Enable in the Packet Filtering field.

3.Click Apply. The Connection Point CP-2E must be rebooted for applied changes to take effect.

4.Click OK. You can reboot the Connection Point CP-2E at any time by clicking the Reboot button at the left.

iPAQ Connection Point CP-2E User Guide

5–11

Image 58

Contents Compaq iPAQ Page Page Contents Connection Point CP-2E Home System Recovery Page Introduction Share a Single High-Speed Internet ConnectionEthernet Networking Security and Advanced ManagementIntroduction What Else Do I Need? Whats in Front? Description SignificanceWhats in Back? Description FunctionInstallation and Configuration InstallationConnecting to the Internet Connecting to Your PCPowering Up Client PC ConfigurationConfiguring Windows 98 and ME Clients Installation and Configuration Click the Obtain an IP address automatically radio button Using the Installation Wizard Setting Up Connection Point CP-2EChoosing the Internet Connection Method Dynamic Internet IP Configuring Dynamic Internet IP Static Internet IPConfiguring Static Internet IP PPPoEConfiguring PPPoE Timezone Setup Administrator Password Settings Confirming Successful Setup Installing the Firmware Update Utility Registering the Connection Point CP-2E Ethernet PCs Adding PCs To Your NetworkAdding Ethernet PCs Windows XP Configuration Configuring the ClientAdding PCs To Your Network Adding PCs To Your Network Windows 2000 Configuration Adding PCs To Your Network Adding PCs To Your Network Windows NT4.0 Configuration Adding PCs To Your Network Page Connection Point CP-2E Home Home Page Information BarSystem Info Icon Quick Setup IconManagement Icons General InformationLAN Status Internet Status Network Information Event Log Firmware Update Icon Help/Troubleshooting IconRenew Internet IP Icon Page System Settings Advanced Setup IconsPassword Resetting to Factory Default Advanced Setup Icons Timezone Setup InternetChanging the Subnet MAC Spoofing Click Network Computer ListDMZ Designating a DMZ Host Virtual Server Adding a Virtual Server Packet Filtering Enabling Packet Filtering Adding an IP Rule Adding Port Rules Dhcp Changing Dhcp Server Settings Reserved IP TableAdding a Reserved IP Address Excluded IP Addresses Adding an Excluded IP Address Bootpip Table Adding a Bootp IP AddressAdvanced Setup Icons Static Routing Table Adding a Static RouteAdvanced Setup Icons Smtp Advanced Setup Icons System Recovery Using the Firmware Update UtilityRestore Factory Defaults Troubleshooting SolutionCannot Network cables Icon. Then, Renew Internet IP \\computername or \\PC IP Modifications Regulatory ComplianceCables Regulatory Compliance Appendix a Specifications NAT NTP SmtpPage Appendix B MAC Address Manual Identification For Windows XPFor Windows 98 and ME PCs Accessing Security Configuration Options For Windows 2000 PCsPage Glossary IPAQ Connection Point CP-2E User Guide Glossary Glossary Glossary