![](/images/new-backgrounds/1186566/18656649x1.webp)
Installation 2-3
■qCable(s)
The R3000 and R3000j models ship with a
The R3000h,
All models ship with a computer interface cable. The computer interface cable is not needed for normal operation. If power management of the UPS is desired, connect the interface cable between the UPS communications port and the serial port on the host computer.
IMPORTANT: If the UPS does not include a power cord that is suitable for your application, contact an authorized Compaq service representative to obtain the appropriate power cord. Please refer to the “Precautions for Power Products” section of the Important Safety Information (included with the UPS kit).
Before Starting the UPS
This section provides installation steps to be completed before starting the
UPS.
Determine the steps required for the application:
■
■Connecting the UPS communications port to the host computer
■Connecting the Remote Emergency Power Off
NOTE: Although these steps can be carried out after the UPS is installed, the UPS will need to be powered down to safely perform these tasks.