Compaq 3000 Series manual Configuration Parameters/LED Indicators

Configuration 4-5

Table 4-1

Configuration Parameters/LED Indicators continued

Parameter	Parameter	LED 16	Explanation
(LED)	Name	Status
7	Shutdown	On	Enables a 5-second delay before turning
	Delay	(default)	off power to the output receptacles after
			receiving a shutdown command from the
			host.
		Off	Enables a 3-minute delay.
8	AC Input Failure	On	Enables an audio alarm when the utility
		(default)	voltage is outside the UPS operating range.
		Off	Disables the audio alarm for this event.
9	Sleep Mode	On	Enables Sleep mode.
		Off	Disables Sleep mode.
		(default)
11-14	Reserved		Reserved for future use.
15	Reset Defaults	On	Defaults are restored2.
		Off	Configuration selected by the user
			overrides defaults.

Notes: 1

2

Only one nominal utility voltage can be configured.

If model R3000j voltage defaults to 120, change the voltage to 100.

If model R3000h-NA voltage defaults to 230, change the voltage to 208.