Configuration Options

SNMP NMS Security Configuration Options

Table C-14. SNMP NMS Security Configuration Options

NMS IP Validation: Disable

Enable Disable

Specifies whether the DSU/CSU validates (for security reasons) the IP address of an SNMP manager attempting to access the DSU/CSU. Allowable addresses are specified using the NMS n IP Adr configuration option.

Enable – The DSU/CSU validates the IP address of SNMP managers attempting to access the DSU/CSU.

Disable – The DSU/CSU does not validate the IP address of SNMP managers.

Number of Managers: 1

1 2 3 4 5 6 7 8 9 10

Specifies the number of SNMP managers that are allowed to access the DSU/CSU.

NOTE: You must configure an IP address for each SNMP manager that is allowed access to the DSU/CSU. Allowable addresses are specified using the NMS n IP Adr configuration option.

NMS n IP Address: Text Field

Text Field Clear

Specifies the allowable IP address of an SNMP manager attempting to access the DSU/CSU. The manager number (n) is specified by the Number of Managers configuration option.

Text Field – Allows you to edit or display the allowable IP address for the SNMP manager.

Clear – Allows you to clear the allowable IP address for the SNMP manager. The IP address is set to 000.000.000.000.

Access Level: Read

Read Read/Write

Specifies the allowable type of access for an authorized SNMP manager if IP address validation has occurred.

Read – Allows read-only access (SNMP Get) to the accessible objects in the MIB for this device. This includes all objects specified as either read-only or read/write in the MIB RFCs.

Read/Write – Allows read and write access (SNMP Get and Set) to the objects in the MIB for this device. Write access is allowed for all objects specified as read/write in the MIB RFCs. Read access is allowed for all objects specified as either read-only or read/write.

3162-A2-GB20-40

August 2000

C-29

Page 127
Image 127
HP 3162 manual Table C-14. Snmp NMS Security Configuration Options