Sync Data Port Assignment Options | HP 3162 manual

Configuration Options

Sync Data Port Assignment Options

Table C-5. Sync Data Port Assignment Options (1 of 3)

Sync Data Port Assignments

Assign To: Network

Network DTE Port

Allows you to assign a synchronous data port to DS0 channels on either the network interface, the DTE Drop/Insert (DSX-1) interface, or another port.

Network – Assigns this port to DS0 channels on the network interface.

DTE – Assigns this port to DS0 channels on the DTE Drop/Insert (DSX-1) interface. If the DTE Drop/Insert (DSX-1) interface is disabled, this selection does not appear.

Port – Assigns this port to another port. Use this feature to designate a port as a backup port. You can attach an external backup device to a backup port and manually assign the selected port to the backup port (i.e., route data from the selected port to the backup port). When a port is assigned to another port, DSR is turned on. EDL does not operate when a synchronous data port is assigned to another synchronous data port. Therefore, if EDL is enabled, it is ignored.

NOTE: Changing this configuration option from one T1 interface to the other (Network or DTE) deallocates all DS0 channels assigned to the previous interface.

Sync Data Port Assignments

Assign By: Block

Block ACAMI Channel

If you select NET or DTE using the Assign To configuration option, this configuration option designates the method for assigning DS0 channels to the destination T1 interface.

Block – Allocates DS0 channels to this port by the block method.

ACAMI – Allocates DS0 channels to this port by the Alternate Channel Alternate Mark Inversion method. The difference between block and ACAMI is that the number of channels allocated with ACAMI is double the number needed for the port rate. With ACAMI, every alternate DS0 channel does not carry data from the port but always transmits and receives all ones.

Channel – Allocates DS0 channels to this port by the individual channel method.

NOTE: Changing this configuration option from one method to another (Block, ACAMI, or Channel) deallocates all DS0 channels assigned to either the network interface or the DTE Drop/Insert (DSX-1) interface.

C-12

August 2000

3162-A2-GB20-40

Image 110

HP 3162 manual Table C-5. Sync Data Port Assignment Options 1

Contents

ACCULINK Trademarks Warranty, Sales, Service, and Training InformationCopyright E 2000 Paradyne Corporation All rights reserved Document Feedback Important Safety Instructions United States EMI Notice Government Requirements and Equipment Return United States DSU/CSU Facility Interface Codes Description Canada Contents Operation Monitoring and Testing Iii Configuration Options Equipment List Glossary Index Contents Document Summary About This GuideDocument Purpose and Intended Audience Vii Viii Product-Related DocumentsDocument Number Document Title Reference Documents About This Guide Overview FeaturesIntroduction DTE Drop/Insert DSX-1 Interface Alarm Message CapabilityTelnet Access Asynchronous Terminal Interface Support Physical Description DSU/CSU Front Panel DSU/CSU Rear Panel Connectors Name Function COM Port Installation Application Examples Network Services Snmp or Telnet Connection Examples Direct Connection Important Instructions Connection through the 10BaseT Port Cabling Example Cabling Example Power-On Self-Test Procedure Operation Front Panel LEDs System LEDs Name Color Meaning Network Interface LEDs Name Color Meaning BPV DTE Drop/Insert DSX-1 Interface LEDs Name Color MeaningPDV Data Port LEDs Name Color Meaning Screen Initiating an Asynchronous Terminal SessionEnding an Asynchronous Terminal Session Area Recovering Asynchronous Terminal Operation Menu Organization Main Status Test Configuration ControlConfiguration Edit/Display Using Asynchronous Terminal Screens Screen Function Keys Usage Keyboard Keys Usage Entering a Password to Gain Access Entering a Password Displaying LED Conditions Example of Display LEDs Screen Changing Configuration Options Displaying or Editing Configuration Options Configuration Load Screen Configuration Edit/Display Screen Configuration Save Screen Saving Edit Changes Operation Configuration Identification Setting Customer IdentificationCustomer Field Configuring the 10BaseT Port Ethernet Port Options Screen Configuring the COM Port for Snmp or Telnet Access Configuring the COM Port for Management Communication Port Options Screen Setting the IP Address Selecting the Link Layer Protocol Configuring DS0 Channels Example of Channel Allocation Network Interface Network Channel Allocation DTE Drop/Insert DSX-1 Interface DTE DSX-1 Channel Allocation Displaying DS0 Channel Assignments DTE to Network DS0 Designations Meaning NetChan Assignment DTE toNetwork Configuring DS0 Channels for Robbed Bit Signaling DTE to Interface Options Screen Procedure Clearing DS0 Channel Allocation Establishing Access Security on the COM Port Re-Enter Setting a PasswordPassword 11. Common Clocking Configurations Selecting the Timing Source Providing Backup Capability Configuration Monitoring and Testing Self-Test Results Self-Test Results Message Description Device Health and Status Health and Status Messages 1 Description Health and Status Messages 2 Description Performance Reports BES UASSES CSS Lofc Ethernet Statistics Ethernet Port Status Field Description IP Routing Table TTL IP Routing Table Field Description TTL Alarms Snmp Traps Enterprise-Specific Trap Definitions Trap Value Event Snmp Trap per Interface Trap Meaning Troubleshooting Troubleshooting 1 Symptom Possible Cause Solutions Troubleshooting 2 Symptom Possible Cause Solutions Message OOF at DTE Test Jacks Test Jacks Test Commands Test Jack Functions Test Jack Name For Networks Remote Loopback TestsSending a Line Loopback Up or Down For Channels Local Loopback Tests Sending a V.54 or Ansi FT1 Activation/Deactivation Sequence Starting a Line Loopback 10. Valid Loopback Combinations Starting a Payload Loopback Starting a DTE Loopback Starting a Repeater Loopback Starting a Data Channel Loopback Starting a Data Terminal Loopback Aborting Loopbacks Network Qrss Port Test PatternsSending Network Qrss or Network 1-in-8 Test Patterns In-8 Network Port Monitoring Port Qrss or Port 511 Test Patterns Sending Port Qrss or Port 511 Test PatternsMonitoring Network Qrss Test Patterns Starting a Lamp Test Lamp TestAborting Test Patterns Aborting a Lamp Test Displaying DSU/CSU Test Status 12. Test Status Messages Description Monitoring and Testing Asynchronous Terminal Menu Asynchronous Terminal Menu Technical Specifications Port Interface Physical DimensionsWeight Approvals Configuration Options D4 ESF Network Interface Configuration OptionsTable C-1. Network Interface Configuration Options 1 AMI B8ZS Network Initiated LLB Enable Enable Disable Table C-1. Network Interface Configuration Options 2Ansi Performance Report Messages Disable Enable Disable Network Initiated PLB Enable Enable Disable DTE Interface Configuration Options Table C-2. DTE Interface Configuration Options 1 Value Meaning Table C-2. DTE Interface Configuration Options 2RBS RBS RBS RBS RBS RBS RBS RBS RBS Port Type E530 Factory 1 V.35 Factory RS449 Sync Data Port Configuration OptionsTable C-3. Sync Data Port Configuration Options 1 Port Base Rate Nx64 Nx64 Nx56 EDL Management Link Disable Enable Disable Table C-3. Sync Data Port Configuration Options 2Embedded Data Link Disable Enable Disable Invert Transmit Clock Disable Enable Disable Table C-3. Sync Data Port Configuration Options 3 Action on Network Yellow Alarm Halt None Halt Table C-3. Sync Data Port Configuration Options 4 Far-End Performance Statistics Disable Disable Maintain Table C-3. Sync Data Port Configuration Options 5 Table C-4. DTE-to-Network Assignment Options Cross Connect Configuration OptionsDTE-to-Network Assignment Options DTE01 DTE02 DTE03 DTE04 DTE05 DTE06 DTE07 DTE08 DTE24 Sync Data Port Assignment Options Table C-5. Sync Data Port Assignment Options 1 Table C-5. Sync Data Port Assignment Options 2 Table C-5. Sync Data Port Assignment Options 3 D01 D02 D03 D04 D05 D06 D07 D08 D24 General Configuration Options Table C-6. General Configuration Options 1 Table C-6. General Configuration Options 2 External Clock Rate KHz 1544 2048 1544 Table C-7. Communication Port Configuration Options 1 User Interface Configuration OptionsCommunication Port Configuration Options Table C-7. Communication Port Configuration Options 2 Table C-8. External Device Configuration Options 1 External Device Configuration OptionsTable C-7. Communication Port Configuration Options 3 Connect Indication String Text Field Table C-8. External Device Configuration Options 2Connect Prefix Text Field Escape Sequence Text Field Disconnect String Text Field Table C-8. External Device Configuration Options 3Escape Sequence Delay sec None None 0.2 0.4 0.6 0.8 Telnet Session Disable Enable Disable Telnet Sessions Configuration OptionsTable C-9. Telnet Sessions Configuration Options Ethernet 10BaseT Port Configuration Options Table C-10. Ethernet Port Configuration Options Ascii Alarm Messages Disable Disable Com Port Alarm and Trap Configuration OptionsTable C-11. Alarm and Trap Configuration Options 1 Alarm & Trap Dial-Out Disable Enable Disable Dial Out Delay Time min 3 4 5 6 7 8 9 Table C-11. Alarm and Trap Configuration Options 2Call Retry Disable Enable Disable Alternate Dial-Out Directory None None 1 2 3 4 Table C-12. Communication Protocol Configuration Options 1 Management and Communication Configuration OptionsCommunication Protocol Configuration Options Node IP Address Text Field Table C-12. Communication Protocol Configuration Options 2 PPP Slip General Snmp Management Configuration Options Table C-13. General Snmp Management Configuration Options Snmp NMS Security Configuration Options Table C-14. Snmp NMS Security Configuration Options Snmp Traps Disable Enable Disable Snmp Traps Configuration OptionsTable C-15. Snmp Traps Configuration Options 1 Number of Trap Managers 1 1 2 3 4 5 Enterprise Specific Traps Enable Enable Disable Table C-15. Snmp Traps Configuration Options 2General Traps Both Disable Warm AuthFail Both Link Traps Both Disable Up Down Both Table C-15. Snmp Traps Configuration Options 3 Link Trap Interfaces All Network DTE T1s Ports All DTE Interface Options Configuration WorksheetsNetwork Interface Options Sync Data Port Options Port Sync Data Port Options Port Network Interface Network Channel Allocation DTE Drop/Insert DSX-1 Interface DTE DSX-1 Channel Allocation DTE Signaling Assign N1 Voice RBS or Data Acami Sync Data Port OptionsChannel User Interface Communication Port Disable , DTRGeneral Options User Interface External Device Options User Interface Ethernet Port Options Alarm and Trap Configuration OptionsUser Interface Telnet Sessions Options Management and Communication Communication Protocol Options Snmp Traps Options Management and CommunicationSnmp NMS Security Options T1 Network Interface Table D-1. T1 Network Interface Connector Signal Pin NumberPin Assignments Figure D-1. T1 Line Interface Cable, RJ48C-to-RJ48C DTE Drop/Insert Interface Figure D-3. DTE Drop/Insert DSX-1 Cable 10BaseT Connector Use Pin # Table D-3. COM Port Connector Signal Direction Pin Number COM Port Interface Figure D-4. COM Port-to-PC Cable Pin P2 Serial Crossover CablePin EIA-530-A Port Interface Connector EIA-530-A-to-RS-449 Adapter Figure D-7. EIA-530-A-to-RS-449 Adapter Pin Assignments EIA-530-A-to-V.35 Adapter Figure D-8. EIA-530-A-to-V.35 Adapter Pin Assignments EIA-530-A-to-X.21 Adapter Direction Pin Number Table D-8. External Clock Connector Signal Pin Number External Clock Interface Group Snmp MIB ObjectsMIB II RFC System Group, MIB System Group sysName Object system System Group sysServices Object systemInterface Group, MIB System Group sysLocation Object system Interface Group ifIndex Object ifEntry Interface Group ifDescr Object ifEntry Interface Group ifMtu Object ifEntry Interface Group ifAdminStatus Object ifEntryInterface Group ifType Object ifEntry Interface Group ifSpeed Object ifEntry Interface Group ifOperStatus Object ifEntry Interface Group ifLastChange Object ifEntry IP Group, MIB Interface Group Input Counters objects ifEntry 10 to ifEntry IP Group ipAdEntAddr Object ipAddrEntry IP Group ipForwarding Object ipIP Group ipAddrTable Object ip IP Group ipAdEntIfIndex Object ipAddrEntry IP Group ipRouteDest Object ipRouteEntry IP Group ipRouteIfIndex Object ipRouteEntry UDP Group, MIB Icmp Group, MIBTCP Group, MIB Snmp Group, MIB DS1/E1 MIB RFCTransmission Group, MIB Near End Group dsx1LineType Object dsx1ConfigEntry Near End Group dsx1TimeElapsed Object dsx1ConfigEntryNear End Group dsx1ValidIntervals Object dsx1ConfigEntry Near End Group dsx1LineCoding Object dsx1ConfigEntry Near End Group dsx1LoopbackConfig Object dsx1ConfigEntry Near End Group dsx1SendCode Object dsx1ConfigEntryNear End Group dsx1CircuitIdentifier Object dsx1ConfigEntry Near End Group dsx1LineStatus Object dsx1ConfigEntry Near End Group dsx1SignalMode Object dsx1ConfigEntry Near End Group dsx1Fdl Object dsx1ConfigEntry Near End Group The DS1 Total Table Objects dsx1TotalEntry Far End Group, DS1/E1 MIBDS1 Fractional Group, DS1/E1 MIB Number of Ports rs232Number Object rs232 RS-232-like MIB RFCGeneral Port Table, RS-232-like MIB General Port Table rs232PortIndex Object rs232PortEntry General Port Table rs232PortOutSpeed Object rs232PortEntry General Port Table rs232PortType Object rs232PortEntryGeneral Port Table rs232PortInSpeed Object rs232PortEntry Asynchronous Port Table, RS-232-like MIB Input Signal Table rs232InSigState rs232InSigEntry Input Signal Table, RS-232-like MIBInput Signal Table rs232InSigName rs232InSigEntry Input Signal Table rs232InSigChanges rs232InSigEntry Output Signal Table rs232OutSigState rs232OutSigEntry Output Signal Table, RS-232-like MIBOutput Signal Table rs232OutSigName rs232OutSigEntry Output Signal Table rs232OutSigChanges rs232OutSigEntry Generic Interface Test Table, Generic Interface MIB 3162-A2-GB20-40 August Enterprise MIB IP Network Addressing Scenario Standalone at the Central Site Network Local Carrier with Remote Standalone Figure F-2. Local Carrier with Remote Standalone Local and Remote Carriers Different Subnets Figure F-3. Local Carrier Connected to Remote Carriers Local and Remote Carriers Same Subnet Multiple NMSs Figure F-5. Multiple COM Ports Connected to Different NMSs Equipment Feature Number Equipment List Equipment List Glossary GL-1 GL-2 GL-3 GL-4 GL-5 GL-6 GL-7 GL-8 Index Numbers IN-2 Index IN-3 IN-4 IN-5