HP 3162 manual DTE Drop/Insert DSX-1 Interface LEDs Name Color Meaning, Pdv, Bpv

Operation

Table 3-3. DTE Drop/Insert (DSX-1) Interface LEDs

Name	Color	Meaning
SIG	Green	Monitors the signal being received from the DTE Drop/Insert
		(DSX-1) interface.
		ON :	A recoverable signal is being received from the
			DTE Drop/Insert (DSX-1) interface.
		OFF :	The signal cannot be recovered from the DTE
			Drop/Insert (DSX-1) interface (a Loss of Signal
			condition exists).
OOF	Yellow	Monitors Out Of Frame (OOF) conditions on the received DTE
		Drop/Insert (DSX-1) signal.
		ON :	At least one OOF was detected on the signal
			during the sampling period.
		OFF :	No OOFs were detected on the signal during the
			sampling period.
ALRM	Yellow	Indicates whether an alarm condition exists on the received DTE
		Drop/Insert (DSX-1) signal.
		ON :	An alarm condition (LOS, LOF, EER, Yellow, AIS)
			exists on the received DTE Drop/Insert (DSX-1)
			signal. Use the Device Health and Status
			command to determine the alarm type.
		OFF :	No alarm condition exists on the DTE Drop/Insert
			(DSX-1) interface signal.
PDV	Yellow	Monitors Pulse Density Violations (PDV) on the received DTE
		Drop/Insert (DSX-1) signal.
		ON :	At least one PDV was detected (and corrected)
			on the received DTE Drop/Insert (DSX-1) signal
			during the sampling period.
		OFF :	No PDVs were detected on the received DTE
			Drop/Insert (DSX-1) signal during the sampling
			period.
BPV	Yellow	Monitors Bipolar Violations (BPV) on the received DTE
		Drop/Insert (DSX-1) signal.
		ON :	At least one BPV was detected (and corrected)
			on the received DTE Drop/Insert (DSX-1) signal
			during the sampling period.
		OFF :	No BPVs were detected on the received DTE
			Drop/Insert (DSX-1) signal during the sampling
			period.

3162-A2-GB20-40 August 2000 3-3