Manuals / HP / Computer Equipment / Network Card

HP 3162 manual Enterprise-Specific Trap Definitions Trap Value Event

Models: 3162

1 199

Download 199 pages 36.77 Kb

Page 78

Monitoring and Testing

Table 5-6. Enterprise-Specific Trap Definitions

Trap Value	Event

enterpriseClockFail(1)	The currently configured primary clock source has failed.

enterpriseSelfTestFail(2)	A DSU/CSU hardware failure is detected at self-test. This
	trap is generated after DSU/CSU initialization.

enterpriseDeviceFail(3)	An internal DSU/CSU failure is detected by the operating
	software.

enterpriseTestStart(5)	A test is initiated.

enterpriseConfigChange(6)

A configuration option is changed.

enterpriseTestClear(105)

A test is concluded.

Table 5-7. SNMP Trap per Interface

Interface	Trap Meaning

T1 Network	Up = No alarm or test conditions.
	Down = Alarm or test conditions.

DTE Drop/Insert (DSX-1)	Up = No alarm or test conditions, and the interface is
	enabled.
	Down = Alarm or test conditions, or the interface is
	disabled.

Synchronous Data Ports	Up = No test conditions, the port is assigned to a network
	interface, and both CTS and DSR are ON.
	Down = Test conditions, the port is unassigned, or either
	CTS or DSR is off.

5-14

August 2000

3162-A2-GB20-40

Image 78

HP 3162 manual Enterprise-Specific Trap Definitions Trap Value Event, Snmp Trap per Interface Trap Meaning

Contents

ACCULINK Trademarks Warranty, Sales, Service, and Training InformationCopyright E 2000 Paradyne Corporation All rights reserved Document FeedbackImportant Safety Instructions United States EMI Notice Government Requirements and Equipment Return United States DSU/CSU Facility Interface Codes DescriptionCanada Contents Operation Monitoring and Testing IiiConfiguration Options Equipment List Glossary Index Contents Document Summary About This GuideDocument Purpose and Intended Audience ViiProduct-Related Documents Document Number Document TitleViii Reference Documents About This Guide Features IntroductionOverview DTE Drop/Insert DSX-1 Interface Alarm Message CapabilityTelnet Access Asynchronous Terminal Interface SupportPhysical Description DSU/CSU Front PanelDSU/CSU Rear Panel Connectors Name Function COM PortInstallation Application ExamplesNetwork Services Snmp or Telnet Connection Examples Direct ConnectionImportant Instructions Connection through the 10BaseT PortCabling Example Cabling ExamplePower-On Self-Test ProcedureOperation Front Panel LEDsSystem LEDs Name Color Meaning Network Interface LEDs Name Color MeaningDTE Drop/Insert DSX-1 Interface LEDs Name Color Meaning PDVBPV Data Port LEDs Name Color Meaning Screen Initiating an Asynchronous Terminal SessionEnding an Asynchronous Terminal Session AreaRecovering Asynchronous Terminal Operation Main Status Test Configuration Control Configuration Edit/DisplayMenu Organization Using Asynchronous Terminal Screens Screen Function Keys UsageKeyboard Keys Usage Entering a Password to Gain Access Entering a PasswordDisplaying LED Conditions Example of Display LEDs ScreenChanging Configuration Options Displaying or Editing Configuration Options Configuration Load ScreenConfiguration Edit/Display Screen Configuration Save Screen Saving Edit ChangesOperation Configuration Identification Setting Customer IdentificationCustomer FieldConfiguring the 10BaseT Port Ethernet Port Options ScreenConfiguring the COM Port for Snmp or Telnet Access Configuring the COM Port for Management Communication Port Options ScreenSetting the IP Address Selecting the Link Layer Protocol Configuring DS0 Channels Example of Channel Allocation Network Interface Network Channel AllocationDTE Drop/Insert DSX-1 Interface DTE DSX-1 Channel Allocation Displaying DS0 Channel Assignments DTE to Network DS0 Designations MeaningNetChan DTE to NetworkAssignment Configuring DS0 Channels for Robbed Bit Signaling DTE to Interface Options ScreenProcedure Clearing DS0 Channel Allocation Establishing Access Security on the COM Port Setting a Password PasswordRe-Enter 11. Common Clocking Configurations Selecting the Timing SourceProviding Backup Capability Configuration Monitoring and Testing Self-Test ResultsSelf-Test Results Message Description Device Health and Status Health and Status Messages 1 DescriptionHealth and Status Messages 2 Description Performance Reports UAS SESBES CSS LofcEthernet Statistics Ethernet Port Status Field Description IP Routing Table TTLIP Routing Table Field Description TTLAlarms Snmp Traps Enterprise-Specific Trap Definitions Trap Value Event Snmp Trap per Interface Trap MeaningTroubleshooting Troubleshooting 1 Symptom Possible Cause SolutionsTroubleshooting 2 Symptom Possible Cause Solutions Message OOF at DTETest Jacks Test JacksTest Commands Test Jack Functions Test Jack NameFor Networks Remote Loopback TestsSending a Line Loopback Up or Down For ChannelsLocal Loopback Tests Sending a V.54 or Ansi FT1 Activation/Deactivation SequenceStarting a Line Loopback 10. Valid Loopback CombinationsStarting a Payload Loopback Starting a DTE LoopbackStarting a Repeater Loopback Starting a Data Channel Loopback Starting a Data Terminal Loopback Aborting LoopbacksNetwork Qrss Port Test PatternsSending Network Qrss or Network 1-in-8 Test Patterns In-8 Network PortSending Port Qrss or Port 511 Test Patterns Monitoring Network Qrss Test PatternsMonitoring Port Qrss or Port 511 Test Patterns Starting a Lamp Test Lamp TestAborting Test Patterns Aborting a Lamp TestDisplaying DSU/CSU Test Status 12. Test Status Messages DescriptionMonitoring and Testing Asynchronous Terminal Menu Asynchronous Terminal Menu Technical Specifications Port Interface Physical DimensionsWeight ApprovalsConfiguration Options D4 ESF Network Interface Configuration OptionsTable C-1. Network Interface Configuration Options 1 AMI B8ZSNetwork Initiated LLB Enable Enable Disable Table C-1. Network Interface Configuration Options 2Ansi Performance Report Messages Disable Enable Disable Network Initiated PLB Enable Enable DisableDTE Interface Configuration Options Table C-2. DTE Interface Configuration Options 1Table C-2. DTE Interface Configuration Options 2 RBS RBS RBS RBS RBS RBS RBS RBS RBSValue Meaning Port Type E530 Factory 1 V.35 Factory RS449 Sync Data Port Configuration OptionsTable C-3. Sync Data Port Configuration Options 1 Port Base Rate Nx64 Nx64 Nx56EDL Management Link Disable Enable Disable Table C-3. Sync Data Port Configuration Options 2Embedded Data Link Disable Enable Disable Invert Transmit Clock Disable Enable DisableTable C-3. Sync Data Port Configuration Options 3 Action on Network Yellow Alarm Halt None HaltTable C-3. Sync Data Port Configuration Options 4 Far-End Performance Statistics Disable Disable MaintainTable C-3. Sync Data Port Configuration Options 5 Table C-4. DTE-to-Network Assignment Options Cross Connect Configuration OptionsDTE-to-Network Assignment Options DTE01 DTE02 DTE03 DTE04 DTE05 DTE06 DTE07 DTE08 DTE24Sync Data Port Assignment Options Table C-5. Sync Data Port Assignment Options 1Table C-5. Sync Data Port Assignment Options 2 Table C-5. Sync Data Port Assignment Options 3 D01 D02 D03 D04 D05 D06 D07 D08 D24General Configuration Options Table C-6. General Configuration Options 1Table C-6. General Configuration Options 2 External Clock Rate KHz 1544 2048 1544User Interface Configuration Options Communication Port Configuration OptionsTable C-7. Communication Port Configuration Options 1 Table C-7. Communication Port Configuration Options 2 External Device Configuration Options Table C-7. Communication Port Configuration Options 3Table C-8. External Device Configuration Options 1 Connect Indication String Text Field Table C-8. External Device Configuration Options 2Connect Prefix Text Field Escape Sequence Text FieldTable C-8. External Device Configuration Options 3 Escape Sequence Delay sec None None 0.2 0.4 0.6 0.8Disconnect String Text Field Telnet Sessions Configuration Options Table C-9. Telnet Sessions Configuration OptionsTelnet Session Disable Enable Disable Ethernet 10BaseT Port Configuration Options Table C-10. Ethernet Port Configuration OptionsAscii Alarm Messages Disable Disable Com Port Alarm and Trap Configuration OptionsTable C-11. Alarm and Trap Configuration Options 1 Alarm & Trap Dial-Out Disable Enable DisableDial Out Delay Time min 3 4 5 6 7 8 9 Table C-11. Alarm and Trap Configuration Options 2Call Retry Disable Enable Disable Alternate Dial-Out Directory None None 1 2 3 4Table C-12. Communication Protocol Configuration Options 1 Management and Communication Configuration OptionsCommunication Protocol Configuration Options Node IP Address Text FieldTable C-12. Communication Protocol Configuration Options 2 PPP SlipGeneral Snmp Management Configuration Options Table C-13. General Snmp Management Configuration OptionsSnmp NMS Security Configuration Options Table C-14. Snmp NMS Security Configuration OptionsSnmp Traps Disable Enable Disable Snmp Traps Configuration OptionsTable C-15. Snmp Traps Configuration Options 1 Number of Trap Managers 1 1 2 3 4 5Enterprise Specific Traps Enable Enable Disable Table C-15. Snmp Traps Configuration Options 2General Traps Both Disable Warm AuthFail Both Link Traps Both Disable Up Down BothTable C-15. Snmp Traps Configuration Options 3 Link Trap Interfaces All Network DTE T1s Ports AllConfiguration Worksheets Network Interface OptionsDTE Interface Options Sync Data Port Options Port Sync Data Port Options Port Network Interface Network Channel Allocation DTE Drop/Insert DSX-1 Interface DTE DSX-1 Channel Allocation DTE Signaling Assign N1 Voice RBS or Data Sync Data Port Options ChannelAcami User Interface Communication Port Disable , DTRGeneral Options User Interface External Device OptionsUser Interface Ethernet Port Options Alarm and Trap Configuration OptionsUser Interface Telnet Sessions Options Management and Communication Communication Protocol OptionsManagement and Communication Snmp NMS Security OptionsSnmp Traps Options Table D-1. T1 Network Interface Connector Signal Pin Number Pin AssignmentsT1 Network Interface Figure D-1. T1 Line Interface Cable, RJ48C-to-RJ48C DTE Drop/Insert Interface Figure D-3. DTE Drop/Insert DSX-1 Cable10BaseT Connector Use Pin #Table D-3. COM Port Connector Signal Direction Pin Number COM Port InterfaceFigure D-4. COM Port-to-PC Cable Serial Crossover Cable PinPin P2 EIA-530-A Port Interface Connector EIA-530-A-to-RS-449 Adapter Figure D-7. EIA-530-A-to-RS-449 AdapterPin Assignments EIA-530-A-to-V.35 Adapter Figure D-8. EIA-530-A-to-V.35 AdapterPin Assignments EIA-530-A-to-X.21 Adapter Direction Pin NumberTable D-8. External Clock Connector Signal Pin Number External Clock InterfaceSnmp MIB Objects MIB II RFCGroup System Group, MIB System Group sysName Object system System Group sysServices Object systemInterface Group, MIB System Group sysLocation Object systemInterface Group ifIndex Object ifEntry Interface Group ifDescr Object ifEntryInterface Group ifMtu Object ifEntry Interface Group ifAdminStatus Object ifEntryInterface Group ifType Object ifEntry Interface Group ifSpeed Object ifEntryInterface Group ifOperStatus Object ifEntry Interface Group ifLastChange Object ifEntryIP Group, MIB Interface Group Input Counters objects ifEntry 10 to ifEntryIP Group ipAdEntAddr Object ipAddrEntry IP Group ipForwarding Object ipIP Group ipAddrTable Object ip IP Group ipAdEntIfIndex Object ipAddrEntryIP Group ipRouteDest Object ipRouteEntry IP Group ipRouteIfIndex Object ipRouteEntryIcmp Group, MIB TCP Group, MIBUDP Group, MIB DS1/E1 MIB RFC Transmission Group, MIBSnmp Group, MIB Near End Group dsx1LineType Object dsx1ConfigEntry Near End Group dsx1TimeElapsed Object dsx1ConfigEntryNear End Group dsx1ValidIntervals Object dsx1ConfigEntry Near End Group dsx1LineCoding Object dsx1ConfigEntryNear End Group dsx1SendCode Object dsx1ConfigEntry Near End Group dsx1CircuitIdentifier Object dsx1ConfigEntryNear End Group dsx1LoopbackConfig Object dsx1ConfigEntry Near End Group dsx1LineStatus Object dsx1ConfigEntry Near End Group dsx1SignalMode Object dsx1ConfigEntryNear End Group dsx1Fdl Object dsx1ConfigEntry Far End Group, DS1/E1 MIB DS1 Fractional Group, DS1/E1 MIBNear End Group The DS1 Total Table Objects dsx1TotalEntry Number of Ports rs232Number Object rs232 RS-232-like MIB RFCGeneral Port Table, RS-232-like MIB General Port Table rs232PortIndex Object rs232PortEntryGeneral Port Table rs232PortType Object rs232PortEntry General Port Table rs232PortInSpeed Object rs232PortEntryGeneral Port Table rs232PortOutSpeed Object rs232PortEntry Asynchronous Port Table, RS-232-like MIB Input Signal Table rs232InSigState rs232InSigEntry Input Signal Table, RS-232-like MIBInput Signal Table rs232InSigName rs232InSigEntry Input Signal Table rs232InSigChanges rs232InSigEntryOutput Signal Table rs232OutSigState rs232OutSigEntry Output Signal Table, RS-232-like MIBOutput Signal Table rs232OutSigName rs232OutSigEntry Output Signal Table rs232OutSigChanges rs232OutSigEntryGeneric Interface Test Table, Generic Interface MIB 3162-A2-GB20-40 August Enterprise MIB IP Network Addressing Scenario Standalone at the Central Site NetworkLocal Carrier with Remote Standalone Figure F-2. Local Carrier with Remote StandaloneLocal and Remote Carriers Different Subnets Figure F-3. Local Carrier Connected to Remote CarriersLocal and Remote Carriers Same Subnet Multiple NMSs Figure F-5. Multiple COM Ports Connected to Different NMSsEquipment Feature Number Equipment ListEquipment List Glossary GL-1GL-2 GL-3 GL-4 GL-5 GL-6 GL-7 GL-8 Index NumbersIN-2 IndexIN-3 IN-4 IN-5