HP 3162 manual Setting Customer Identification, Field

Configuration

Setting Customer Identification

The customer identification is used to uniquely identify the DSU/CSU.

"Procedure

To change the customer identification (Customer ID):

1.From the Main Menu screen, select Control.

2.From the Control screen, select Customer ID. The Customer ID screen appears (Figure 4-1).

3.Use the Customer ID field to set the customer identification. The customer identification may be up to 8 characters long. Select Clear to remove all the characters in the associated field.

4.Select Save to store the information in nonvolatile memory.

In addition to the customer identification, you may also enter a system name, system location, and system contact. Although only 40 characters are displayed for these fields, you may enter up to 255 characters. The fields scroll as the additional characters are added.

Customer	main/control/customer id
	Customer ID: Node A		Model: 3162
Identification
	Slot: xx
Field
		CUSTOMER ID
	Customer ID:		Clear
	System Name:		Clear
	System Location:		Clear
	System Contact:		Clear

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu	MainMenu Exit
Save

Figure 4-1. Customer Identification Screen

4-2 August 2000 3162-A2-GB20-40