HP 3162 Figure 5-1.Test Jacks, Figure 5-2.Test Jack Block Diagram

Monitoring and Testing

Test Jacks

Six test jacks (Figure 5-1) are located on the front panel. The DSU/CSU test jack functions are shown in Figure 5-2 and described in Table 5-9. The Selectable Test Jack branch of the asynchronous terminal menu tree (see Appendix A) allows you to select either Equipment (EQPT) or Network (NET) functionality for the Monitor test jack.

"Procedure

To select either Equipment or Network for the Monitor test jack:

1.From the Main Menu screen, select Control.

2.From the Control screen, select Select Monitor Jack.

3.Select either EQPT (Equipment) or NET (Network) depending on the type of Monitor test jack that you want to implement.

NET MON EQPT

In	In	In
Out	Out	Out
		496-14808

Figure 5-1. Test Jacks

	EQPT NET	MON
	In Out	In
	Mon Jack: EQPT		Mon Jack: NET
		(Selectable)
TERMINAL	LINE	INTERNAL	LINE
EQUIPMENT				NETWORK
	RECEIVER	CIRCUITRY	RECEIVER
(DTE)
		(Selectable)
	Mon Jack: EQPT		Mon Jack: NET
	EQPT NET	MON
	Out In	Out		496-14875

Figure 5-2. Test Jack Block Diagram

3162-A2-GB20-40 August 2000 5-17