Manuals / HP / Computer Equipment / Network Card

HP 3162 manual Table C-7. Communication Port Configuration Options 2

Models: 3162

1 199

Download 199 pages 36.77 Kb

Page 116

Configuration Options

Table C-7. Communication Port Configuration Options (2 of 3)

Data Rate:		9.6
1.2	2.4	4.8	9.6	14.4	19.2	38.4

Configures the bit rate for the communication port.

1.2– Sets the bit rate to 1200 bps (for asynchronous operation only).

2.4– Sets the bit rate to 2400 bps.

4.8– Sets the bit rate to 4800 bps.

9.6– Sets the bit rate to 9600 bps.

14.4– Sets the bit rate to 14,400 bps.

19.2– Sets the bit rate to 19,200 bps.

38.4– Sets the bit rate to 38,400 bps.

NOTE: This configuration option is not available if the communication port is configured for synchronous operation and the clock source is external.

Character Length: 8 7 8

Configures the character length (7 or 8 bits) for the communication port.

NOTES: – This configuration option must be set to 8 if the communication port is used as the network communication link.

–This configuration option is not available if the communication port is configured for synchronous operation.

Parity: None

None Even Odd

Configures the parity (none, even, or odd) for the communication port.

NOTE: This configuration option is not available if the communication port is configured for synchronous operation.

Stop Bits: 1 1 1.5 2

Configures the number of stop bits (1, 1.5, or 2) for the communication port.

NOTE: This configuration option is not available if the communication port is configured for synchronous operation.

Ignore Control Leads: Disable

Disable DTR

Specifies whether the DSU/CSU ignores the state of the Data Terminal Ready (DTR) input to the communication port.

Disable – The control leads are treated in the standard manner.

DTR – DTR is ignored.

NOTE: This configuration option is not available if the communication port is configured for synchronous operation.

Password Required: Disable

Enable Disable

Activates a password prompt that prevents access until a password is entered.

Enable – Prompts the communications port user to enter a password.

Disable – Does not require a password.

C-18

August 2000

3162-A2-GB20-40

Image 116

HP 3162 manual Table C-7. Communication Port Configuration Options 2

Contents

ACCULINK Warranty, Sales, Service, and Training Information Copyright E 2000 Paradyne Corporation All rights reservedTrademarks Document FeedbackImportant Safety Instructions United States EMI Notice Government Requirements and Equipment Return United States DSU/CSU Facility Interface Codes DescriptionCanada Contents Operation Monitoring and Testing IiiConfiguration Options Equipment List Glossary Index Contents About This Guide Document Purpose and Intended AudienceDocument Summary ViiViii Product-Related DocumentsDocument Number Document Title Reference Documents About This Guide Overview FeaturesIntroduction Alarm Message Capability Telnet AccessDTE Drop/Insert DSX-1 Interface Asynchronous Terminal Interface SupportPhysical Description DSU/CSU Front PanelDSU/CSU Rear Panel Connectors Name Function COM PortInstallation Application ExamplesNetwork Services Snmp or Telnet Connection Examples Direct ConnectionImportant Instructions Connection through the 10BaseT PortCabling Example Cabling ExamplePower-On Self-Test ProcedureOperation Front Panel LEDsSystem LEDs Name Color Meaning Network Interface LEDs Name Color MeaningBPV DTE Drop/Insert DSX-1 Interface LEDs Name Color MeaningPDV Data Port LEDs Name Color Meaning Initiating an Asynchronous Terminal Session Ending an Asynchronous Terminal SessionScreen AreaRecovering Asynchronous Terminal Operation Menu Organization Main Status Test Configuration ControlConfiguration Edit/Display Using Asynchronous Terminal Screens Screen Function Keys UsageKeyboard Keys Usage Entering a Password to Gain Access Entering a PasswordDisplaying LED Conditions Example of Display LEDs ScreenChanging Configuration Options Displaying or Editing Configuration Options Configuration Load ScreenConfiguration Edit/Display Screen Configuration Save Screen Saving Edit ChangesOperation Configuration Setting Customer Identification CustomerIdentification FieldConfiguring the 10BaseT Port Ethernet Port Options ScreenConfiguring the COM Port for Snmp or Telnet Access Configuring the COM Port for Management Communication Port Options ScreenSetting the IP Address Selecting the Link Layer Protocol Configuring DS0 Channels Example of Channel Allocation Network Interface Network Channel AllocationDTE Drop/Insert DSX-1 Interface DTE DSX-1 Channel Allocation Displaying DS0 Channel Assignments DTE to Network DS0 Designations MeaningNetChan Assignment DTE toNetwork Configuring DS0 Channels for Robbed Bit Signaling DTE to Interface Options ScreenProcedure Clearing DS0 Channel Allocation Establishing Access Security on the COM Port Re-Enter Setting a PasswordPassword 11. Common Clocking Configurations Selecting the Timing SourceProviding Backup Capability Configuration Monitoring and Testing Self-Test ResultsSelf-Test Results Message Description Device Health and Status Health and Status Messages 1 DescriptionHealth and Status Messages 2 Description Performance Reports BES UASSES CSS LofcEthernet Statistics Ethernet Port Status Field Description IP Routing Table TTLIP Routing Table Field Description TTLAlarms Snmp Traps Enterprise-Specific Trap Definitions Trap Value Event Snmp Trap per Interface Trap MeaningTroubleshooting Troubleshooting 1 Symptom Possible Cause SolutionsTroubleshooting 2 Symptom Possible Cause Solutions Message OOF at DTETest Jacks Test JacksTest Commands Test Jack Functions Test Jack NameRemote Loopback Tests Sending a Line Loopback Up or DownFor Networks For ChannelsLocal Loopback Tests Sending a V.54 or Ansi FT1 Activation/Deactivation SequenceStarting a Line Loopback 10. Valid Loopback CombinationsStarting a Payload Loopback Starting a DTE LoopbackStarting a Repeater Loopback Starting a Data Channel Loopback Starting a Data Terminal Loopback Aborting LoopbacksTest Patterns Sending Network Qrss or Network 1-in-8 Test PatternsNetwork Qrss Port In-8 Network PortMonitoring Port Qrss or Port 511 Test Patterns Sending Port Qrss or Port 511 Test PatternsMonitoring Network Qrss Test Patterns Lamp Test Aborting Test PatternsStarting a Lamp Test Aborting a Lamp TestDisplaying DSU/CSU Test Status 12. Test Status Messages DescriptionMonitoring and Testing Asynchronous Terminal Menu Asynchronous Terminal Menu Technical Specifications Physical Dimensions WeightPort Interface ApprovalsConfiguration Options Network Interface Configuration Options Table C-1. Network Interface Configuration Options 1D4 ESF AMI B8ZSTable C-1. Network Interface Configuration Options 2 Ansi Performance Report Messages Disable Enable DisableNetwork Initiated LLB Enable Enable Disable Network Initiated PLB Enable Enable DisableDTE Interface Configuration Options Table C-2. DTE Interface Configuration Options 1Value Meaning Table C-2. DTE Interface Configuration Options 2RBS RBS RBS RBS RBS RBS RBS RBS RBS Sync Data Port Configuration Options Table C-3. Sync Data Port Configuration Options 1Port Type E530 Factory 1 V.35 Factory RS449 Port Base Rate Nx64 Nx64 Nx56Table C-3. Sync Data Port Configuration Options 2 Embedded Data Link Disable Enable DisableEDL Management Link Disable Enable Disable Invert Transmit Clock Disable Enable DisableTable C-3. Sync Data Port Configuration Options 3 Action on Network Yellow Alarm Halt None HaltTable C-3. Sync Data Port Configuration Options 4 Far-End Performance Statistics Disable Disable MaintainTable C-3. Sync Data Port Configuration Options 5 Cross Connect Configuration Options DTE-to-Network Assignment OptionsTable C-4. DTE-to-Network Assignment Options DTE01 DTE02 DTE03 DTE04 DTE05 DTE06 DTE07 DTE08 DTE24Sync Data Port Assignment Options Table C-5. Sync Data Port Assignment Options 1Table C-5. Sync Data Port Assignment Options 2 Table C-5. Sync Data Port Assignment Options 3 D01 D02 D03 D04 D05 D06 D07 D08 D24General Configuration Options Table C-6. General Configuration Options 1Table C-6. General Configuration Options 2 External Clock Rate KHz 1544 2048 1544Table C-7. Communication Port Configuration Options 1 User Interface Configuration OptionsCommunication Port Configuration Options Table C-7. Communication Port Configuration Options 2 Table C-8. External Device Configuration Options 1 External Device Configuration OptionsTable C-7. Communication Port Configuration Options 3 Table C-8. External Device Configuration Options 2 Connect Prefix Text FieldConnect Indication String Text Field Escape Sequence Text FieldDisconnect String Text Field Table C-8. External Device Configuration Options 3Escape Sequence Delay sec None None 0.2 0.4 0.6 0.8 Telnet Session Disable Enable Disable Telnet Sessions Configuration OptionsTable C-9. Telnet Sessions Configuration Options Ethernet 10BaseT Port Configuration Options Table C-10. Ethernet Port Configuration OptionsAlarm and Trap Configuration Options Table C-11. Alarm and Trap Configuration Options 1Ascii Alarm Messages Disable Disable Com Port Alarm & Trap Dial-Out Disable Enable DisableTable C-11. Alarm and Trap Configuration Options 2 Call Retry Disable Enable DisableDial Out Delay Time min 3 4 5 6 7 8 9 Alternate Dial-Out Directory None None 1 2 3 4Management and Communication Configuration Options Communication Protocol Configuration OptionsTable C-12. Communication Protocol Configuration Options 1 Node IP Address Text FieldTable C-12. Communication Protocol Configuration Options 2 PPP SlipGeneral Snmp Management Configuration Options Table C-13. General Snmp Management Configuration OptionsSnmp NMS Security Configuration Options Table C-14. Snmp NMS Security Configuration OptionsSnmp Traps Configuration Options Table C-15. Snmp Traps Configuration Options 1Snmp Traps Disable Enable Disable Number of Trap Managers 1 1 2 3 4 5Table C-15. Snmp Traps Configuration Options 2 General Traps Both Disable Warm AuthFail BothEnterprise Specific Traps Enable Enable Disable Link Traps Both Disable Up Down BothTable C-15. Snmp Traps Configuration Options 3 Link Trap Interfaces All Network DTE T1s Ports AllDTE Interface Options Configuration WorksheetsNetwork Interface Options Sync Data Port Options Port Sync Data Port Options Port Network Interface Network Channel Allocation DTE Drop/Insert DSX-1 Interface DTE DSX-1 Channel Allocation DTE Signaling Assign N1 Voice RBS or Data Acami Sync Data Port OptionsChannel Disable , DTR General OptionsUser Interface Communication Port User Interface External Device OptionsAlarm and Trap Configuration Options User Interface Telnet Sessions OptionsUser Interface Ethernet Port Options Management and Communication Communication Protocol OptionsSnmp Traps Options Management and CommunicationSnmp NMS Security Options T1 Network Interface Table D-1. T1 Network Interface Connector Signal Pin NumberPin Assignments Figure D-1. T1 Line Interface Cable, RJ48C-to-RJ48C DTE Drop/Insert Interface Figure D-3. DTE Drop/Insert DSX-1 Cable10BaseT Connector Use Pin #Table D-3. COM Port Connector Signal Direction Pin Number COM Port InterfaceFigure D-4. COM Port-to-PC Cable Pin P2 Serial Crossover CablePin EIA-530-A Port Interface Connector EIA-530-A-to-RS-449 Adapter Figure D-7. EIA-530-A-to-RS-449 AdapterPin Assignments EIA-530-A-to-V.35 Adapter Figure D-8. EIA-530-A-to-V.35 AdapterPin Assignments EIA-530-A-to-X.21 Adapter Direction Pin NumberTable D-8. External Clock Connector Signal Pin Number External Clock InterfaceGroup Snmp MIB ObjectsMIB II RFC System Group, MIB System Group sysServices Object system Interface Group, MIBSystem Group sysName Object system System Group sysLocation Object systemInterface Group ifIndex Object ifEntry Interface Group ifDescr Object ifEntryInterface Group ifAdminStatus Object ifEntry Interface Group ifType Object ifEntryInterface Group ifMtu Object ifEntry Interface Group ifSpeed Object ifEntryInterface Group ifOperStatus Object ifEntry Interface Group ifLastChange Object ifEntryIP Group, MIB Interface Group Input Counters objects ifEntry 10 to ifEntryIP Group ipForwarding Object ip IP Group ipAddrTable Object ipIP Group ipAdEntAddr Object ipAddrEntry IP Group ipAdEntIfIndex Object ipAddrEntryIP Group ipRouteDest Object ipRouteEntry IP Group ipRouteIfIndex Object ipRouteEntryUDP Group, MIB Icmp Group, MIBTCP Group, MIB Snmp Group, MIB DS1/E1 MIB RFCTransmission Group, MIB Near End Group dsx1TimeElapsed Object dsx1ConfigEntry Near End Group dsx1ValidIntervals Object dsx1ConfigEntryNear End Group dsx1LineType Object dsx1ConfigEntry Near End Group dsx1LineCoding Object dsx1ConfigEntryNear End Group dsx1LoopbackConfig Object dsx1ConfigEntry Near End Group dsx1SendCode Object dsx1ConfigEntryNear End Group dsx1CircuitIdentifier Object dsx1ConfigEntry Near End Group dsx1LineStatus Object dsx1ConfigEntry Near End Group dsx1SignalMode Object dsx1ConfigEntryNear End Group dsx1Fdl Object dsx1ConfigEntry Near End Group The DS1 Total Table Objects dsx1TotalEntry Far End Group, DS1/E1 MIBDS1 Fractional Group, DS1/E1 MIB RS-232-like MIB RFC General Port Table, RS-232-like MIBNumber of Ports rs232Number Object rs232 General Port Table rs232PortIndex Object rs232PortEntryGeneral Port Table rs232PortOutSpeed Object rs232PortEntry General Port Table rs232PortType Object rs232PortEntryGeneral Port Table rs232PortInSpeed Object rs232PortEntry Asynchronous Port Table, RS-232-like MIB Input Signal Table, RS-232-like MIB Input Signal Table rs232InSigName rs232InSigEntryInput Signal Table rs232InSigState rs232InSigEntry Input Signal Table rs232InSigChanges rs232InSigEntryOutput Signal Table, RS-232-like MIB Output Signal Table rs232OutSigName rs232OutSigEntryOutput Signal Table rs232OutSigState rs232OutSigEntry Output Signal Table rs232OutSigChanges rs232OutSigEntryGeneric Interface Test Table, Generic Interface MIB 3162-A2-GB20-40 August Enterprise MIB IP Network Addressing Scenario Standalone at the Central Site NetworkLocal Carrier with Remote Standalone Figure F-2. Local Carrier with Remote StandaloneLocal and Remote Carriers Different Subnets Figure F-3. Local Carrier Connected to Remote CarriersLocal and Remote Carriers Same Subnet Multiple NMSs Figure F-5. Multiple COM Ports Connected to Different NMSsEquipment Feature Number Equipment ListEquipment List Glossary GL-1GL-2 GL-3 GL-4 GL-5 GL-6 GL-7 GL-8 Index NumbersIN-2 IndexIN-3 IN-4 IN-5