Manuals / HP / Computer Equipment / Network Card

HP 3162 manual Near End Group, DS1/E1 MIB, Near End Group dsx1TimeElapsed Object dsx1ConfigEntry

Models: 3162

1 199

Download 199 pages 36.77 Kb

Page 166

SNMP MIB Objects

Near End Group, DS1/E1 MIB

The DS1 Near End Group consists of the following four tables:

HDS1 Configuration

HDS1 Current

HDS1 Interval

HDS1 Total

All four tables are fully supported for the network interface. Since statistics are not kept for the DTE Drop/Insert (DSX-1) interface, only the DS1 Configuration table is fully supported. The “statistic” objects for the DTE Drop/Insert (DSX-1) interface entry in the DS1 Current, DS1 Interval, and DS1 Total tables are always zero (null). The following sections provide clarification for objects contained in the Near End Group when it is not clear how the object definition in the DS1/E1 MIB is related to the DSU/CSU.

Near End Group – “dsx1TimeElapsed” Object (dsx1ConfigEntry 3)

Applies to the network interface only. An error status is returned if access is attempted for the DTE Drop/Insert (DSX-1) interface.

Near End Group – “dsx1ValidIntervals” Object (dsx1ConfigEntry 4)

Applies to the network interface only. An error status is returned if access is attempted for the DTE Drop/Insert (DSX-1) interface.

Near End Group – “dsx1LineType” Object (dsx1ConfigEntry 5)

This object corresponds to the NET Framing/DTE Framing configuration options for the T1 interfaces on the DSU/CSU. Only the following values are supported by the DSU/CSU.

Hdsx1ESF(2) – Indicates ESF framing.

Hdsx1D4(2) – Indicates D4 framing.

Near End Group – “dsx1LineCoding” Object (dsx1ConfigEntry 6)

This object corresponds to the NET Coding/DTE Coding configuration options for the T1 interfaces on the DSU/CSU. Only the following values are supported by the DSU/CSU.

Hdsx1B8ZS(2) – Indicates B8ZS line coding.

Hdsx1AMI(5) – Indicates AMI line coding.

E-12

August 2000

3162-A2-GB20-40

Image 166

HP 3162 manual Near End Group, DS1/E1 MIB, Near End Group dsx1TimeElapsed Object dsx1ConfigEntry

Contents

ACCULINK Trademarks Warranty, Sales, Service, and Training InformationCopyright E 2000 Paradyne Corporation All rights reserved Document FeedbackImportant Safety Instructions United States EMI Notice Government Requirements and Equipment Return United States DSU/CSU Facility Interface Codes DescriptionCanada Contents Operation Monitoring and Testing IiiConfiguration Options Equipment List Glossary Index Contents Document Summary About This GuideDocument Purpose and Intended Audience ViiDocument Number Document Title Product-Related DocumentsViii Reference Documents About This Guide Introduction FeaturesOverview DTE Drop/Insert DSX-1 Interface Alarm Message CapabilityTelnet Access Asynchronous Terminal Interface SupportPhysical Description DSU/CSU Front PanelDSU/CSU Rear Panel Connectors Name Function COM PortInstallation Application ExamplesNetwork Services Snmp or Telnet Connection Examples Direct ConnectionImportant Instructions Connection through the 10BaseT PortCabling Example Cabling ExamplePower-On Self-Test ProcedureOperation Front Panel LEDsSystem LEDs Name Color Meaning Network Interface LEDs Name Color MeaningPDV DTE Drop/Insert DSX-1 Interface LEDs Name Color MeaningBPV Data Port LEDs Name Color Meaning Screen Initiating an Asynchronous Terminal SessionEnding an Asynchronous Terminal Session AreaRecovering Asynchronous Terminal Operation Configuration Edit/Display Main Status Test Configuration ControlMenu Organization Using Asynchronous Terminal Screens Screen Function Keys UsageKeyboard Keys Usage Entering a Password to Gain Access Entering a PasswordDisplaying LED Conditions Example of Display LEDs ScreenChanging Configuration Options Displaying or Editing Configuration Options Configuration Load ScreenConfiguration Edit/Display Screen Configuration Save Screen Saving Edit ChangesOperation Configuration Identification Setting Customer IdentificationCustomer FieldConfiguring the 10BaseT Port Ethernet Port Options ScreenConfiguring the COM Port for Snmp or Telnet Access Configuring the COM Port for Management Communication Port Options ScreenSetting the IP Address Selecting the Link Layer Protocol Configuring DS0 Channels Example of Channel Allocation Network Interface Network Channel AllocationDTE Drop/Insert DSX-1 Interface DTE DSX-1 Channel Allocation Displaying DS0 Channel Assignments DTE to Network DS0 Designations MeaningNetChan Network DTE toAssignment Configuring DS0 Channels for Robbed Bit Signaling DTE to Interface Options ScreenProcedure Clearing DS0 Channel Allocation Establishing Access Security on the COM Port Password Setting a PasswordRe-Enter 11. Common Clocking Configurations Selecting the Timing SourceProviding Backup Capability Configuration Monitoring and Testing Self-Test ResultsSelf-Test Results Message Description Device Health and Status Health and Status Messages 1 DescriptionHealth and Status Messages 2 Description Performance Reports SES UASBES CSS LofcEthernet Statistics Ethernet Port Status Field Description IP Routing Table TTLIP Routing Table Field Description TTLAlarms Snmp Traps Enterprise-Specific Trap Definitions Trap Value Event Snmp Trap per Interface Trap MeaningTroubleshooting Troubleshooting 1 Symptom Possible Cause SolutionsTroubleshooting 2 Symptom Possible Cause Solutions Message OOF at DTETest Jacks Test JacksTest Commands Test Jack Functions Test Jack NameFor Networks Remote Loopback TestsSending a Line Loopback Up or Down For ChannelsLocal Loopback Tests Sending a V.54 or Ansi FT1 Activation/Deactivation SequenceStarting a Line Loopback 10. Valid Loopback CombinationsStarting a Payload Loopback Starting a DTE LoopbackStarting a Repeater Loopback Starting a Data Channel Loopback Starting a Data Terminal Loopback Aborting LoopbacksNetwork Qrss Port Test PatternsSending Network Qrss or Network 1-in-8 Test Patterns In-8 Network PortMonitoring Network Qrss Test Patterns Sending Port Qrss or Port 511 Test PatternsMonitoring Port Qrss or Port 511 Test Patterns Starting a Lamp Test Lamp TestAborting Test Patterns Aborting a Lamp TestDisplaying DSU/CSU Test Status 12. Test Status Messages DescriptionMonitoring and Testing Asynchronous Terminal Menu Asynchronous Terminal Menu Technical Specifications Port Interface Physical DimensionsWeight ApprovalsConfiguration Options D4 ESF Network Interface Configuration OptionsTable C-1. Network Interface Configuration Options 1 AMI B8ZSNetwork Initiated LLB Enable Enable Disable Table C-1. Network Interface Configuration Options 2Ansi Performance Report Messages Disable Enable Disable Network Initiated PLB Enable Enable DisableDTE Interface Configuration Options Table C-2. DTE Interface Configuration Options 1RBS RBS RBS RBS RBS RBS RBS RBS RBS Table C-2. DTE Interface Configuration Options 2Value Meaning Port Type E530 Factory 1 V.35 Factory RS449 Sync Data Port Configuration OptionsTable C-3. Sync Data Port Configuration Options 1 Port Base Rate Nx64 Nx64 Nx56EDL Management Link Disable Enable Disable Table C-3. Sync Data Port Configuration Options 2Embedded Data Link Disable Enable Disable Invert Transmit Clock Disable Enable DisableTable C-3. Sync Data Port Configuration Options 3 Action on Network Yellow Alarm Halt None HaltTable C-3. Sync Data Port Configuration Options 4 Far-End Performance Statistics Disable Disable MaintainTable C-3. Sync Data Port Configuration Options 5 Table C-4. DTE-to-Network Assignment Options Cross Connect Configuration OptionsDTE-to-Network Assignment Options DTE01 DTE02 DTE03 DTE04 DTE05 DTE06 DTE07 DTE08 DTE24Sync Data Port Assignment Options Table C-5. Sync Data Port Assignment Options 1Table C-5. Sync Data Port Assignment Options 2 Table C-5. Sync Data Port Assignment Options 3 D01 D02 D03 D04 D05 D06 D07 D08 D24General Configuration Options Table C-6. General Configuration Options 1Table C-6. General Configuration Options 2 External Clock Rate KHz 1544 2048 1544Communication Port Configuration Options User Interface Configuration OptionsTable C-7. Communication Port Configuration Options 1 Table C-7. Communication Port Configuration Options 2 Table C-7. Communication Port Configuration Options 3 External Device Configuration OptionsTable C-8. External Device Configuration Options 1 Connect Indication String Text Field Table C-8. External Device Configuration Options 2Connect Prefix Text Field Escape Sequence Text FieldEscape Sequence Delay sec None None 0.2 0.4 0.6 0.8 Table C-8. External Device Configuration Options 3Disconnect String Text Field Table C-9. Telnet Sessions Configuration Options Telnet Sessions Configuration OptionsTelnet Session Disable Enable Disable Ethernet 10BaseT Port Configuration Options Table C-10. Ethernet Port Configuration OptionsAscii Alarm Messages Disable Disable Com Port Alarm and Trap Configuration OptionsTable C-11. Alarm and Trap Configuration Options 1 Alarm & Trap Dial-Out Disable Enable DisableDial Out Delay Time min 3 4 5 6 7 8 9 Table C-11. Alarm and Trap Configuration Options 2Call Retry Disable Enable Disable Alternate Dial-Out Directory None None 1 2 3 4Table C-12. Communication Protocol Configuration Options 1 Management and Communication Configuration OptionsCommunication Protocol Configuration Options Node IP Address Text FieldTable C-12. Communication Protocol Configuration Options 2 PPP SlipGeneral Snmp Management Configuration Options Table C-13. General Snmp Management Configuration OptionsSnmp NMS Security Configuration Options Table C-14. Snmp NMS Security Configuration OptionsSnmp Traps Disable Enable Disable Snmp Traps Configuration OptionsTable C-15. Snmp Traps Configuration Options 1 Number of Trap Managers 1 1 2 3 4 5Enterprise Specific Traps Enable Enable Disable Table C-15. Snmp Traps Configuration Options 2General Traps Both Disable Warm AuthFail Both Link Traps Both Disable Up Down BothTable C-15. Snmp Traps Configuration Options 3 Link Trap Interfaces All Network DTE T1s Ports AllNetwork Interface Options Configuration WorksheetsDTE Interface Options Sync Data Port Options Port Sync Data Port Options Port Network Interface Network Channel Allocation DTE Drop/Insert DSX-1 Interface DTE DSX-1 Channel Allocation DTE Signaling Assign N1 Voice RBS or Data Channel Sync Data Port OptionsAcami User Interface Communication Port Disable , DTRGeneral Options User Interface External Device OptionsUser Interface Ethernet Port Options Alarm and Trap Configuration OptionsUser Interface Telnet Sessions Options Management and Communication Communication Protocol OptionsSnmp NMS Security Options Management and CommunicationSnmp Traps Options Pin Assignments Table D-1. T1 Network Interface Connector Signal Pin NumberT1 Network Interface Figure D-1. T1 Line Interface Cable, RJ48C-to-RJ48C DTE Drop/Insert Interface Figure D-3. DTE Drop/Insert DSX-1 Cable10BaseT Connector Use Pin #Table D-3. COM Port Connector Signal Direction Pin Number COM Port InterfaceFigure D-4. COM Port-to-PC Cable Pin Serial Crossover CablePin P2 EIA-530-A Port Interface Connector EIA-530-A-to-RS-449 Adapter Figure D-7. EIA-530-A-to-RS-449 AdapterPin Assignments EIA-530-A-to-V.35 Adapter Figure D-8. EIA-530-A-to-V.35 AdapterPin Assignments EIA-530-A-to-X.21 Adapter Direction Pin NumberTable D-8. External Clock Connector Signal Pin Number External Clock InterfaceMIB II RFC Snmp MIB ObjectsGroup System Group, MIB System Group sysName Object system System Group sysServices Object systemInterface Group, MIB System Group sysLocation Object systemInterface Group ifIndex Object ifEntry Interface Group ifDescr Object ifEntryInterface Group ifMtu Object ifEntry Interface Group ifAdminStatus Object ifEntryInterface Group ifType Object ifEntry Interface Group ifSpeed Object ifEntryInterface Group ifOperStatus Object ifEntry Interface Group ifLastChange Object ifEntryIP Group, MIB Interface Group Input Counters objects ifEntry 10 to ifEntryIP Group ipAdEntAddr Object ipAddrEntry IP Group ipForwarding Object ipIP Group ipAddrTable Object ip IP Group ipAdEntIfIndex Object ipAddrEntryIP Group ipRouteDest Object ipRouteEntry IP Group ipRouteIfIndex Object ipRouteEntryTCP Group, MIB Icmp Group, MIBUDP Group, MIB Transmission Group, MIB DS1/E1 MIB RFCSnmp Group, MIB Near End Group dsx1LineType Object dsx1ConfigEntry Near End Group dsx1TimeElapsed Object dsx1ConfigEntryNear End Group dsx1ValidIntervals Object dsx1ConfigEntry Near End Group dsx1LineCoding Object dsx1ConfigEntryNear End Group dsx1CircuitIdentifier Object dsx1ConfigEntry Near End Group dsx1SendCode Object dsx1ConfigEntryNear End Group dsx1LoopbackConfig Object dsx1ConfigEntry Near End Group dsx1LineStatus Object dsx1ConfigEntry Near End Group dsx1SignalMode Object dsx1ConfigEntryNear End Group dsx1Fdl Object dsx1ConfigEntry DS1 Fractional Group, DS1/E1 MIB Far End Group, DS1/E1 MIBNear End Group The DS1 Total Table Objects dsx1TotalEntry Number of Ports rs232Number Object rs232 RS-232-like MIB RFCGeneral Port Table, RS-232-like MIB General Port Table rs232PortIndex Object rs232PortEntryGeneral Port Table rs232PortInSpeed Object rs232PortEntry General Port Table rs232PortType Object rs232PortEntryGeneral Port Table rs232PortOutSpeed Object rs232PortEntry Asynchronous Port Table, RS-232-like MIB Input Signal Table rs232InSigState rs232InSigEntry Input Signal Table, RS-232-like MIBInput Signal Table rs232InSigName rs232InSigEntry Input Signal Table rs232InSigChanges rs232InSigEntryOutput Signal Table rs232OutSigState rs232OutSigEntry Output Signal Table, RS-232-like MIBOutput Signal Table rs232OutSigName rs232OutSigEntry Output Signal Table rs232OutSigChanges rs232OutSigEntryGeneric Interface Test Table, Generic Interface MIB 3162-A2-GB20-40 August Enterprise MIB IP Network Addressing Scenario Standalone at the Central Site NetworkLocal Carrier with Remote Standalone Figure F-2. Local Carrier with Remote StandaloneLocal and Remote Carriers Different Subnets Figure F-3. Local Carrier Connected to Remote CarriersLocal and Remote Carriers Same Subnet Multiple NMSs Figure F-5. Multiple COM Ports Connected to Different NMSsEquipment Feature Number Equipment ListEquipment List Glossary GL-1GL-2 GL-3 GL-4 GL-5 GL-6 GL-7 GL-8 Index NumbersIN-2 IndexIN-3 IN-4 IN-5