Alcatel Carrier Internetworking Solutions TQBJ0223 manual Setting the network, Connecting the PC

Page 36

Setting the network

The settings required for the network must be established in order to use the Web browser (page 37) functions that the PC uses to control the projector.

 

NETWORK

 

 

 

 

HOST NAME

PROJECTOR

 

 

 

 

 

 

 

DHCP

OFF

 

 

 

IP ADDRESS

192.168. 0.

8

 

 

SUBNET MASK

255.255.255.

0

 

 

GATEWAY

192.168. 0.

1

 

 

NETWORK STATUS

 

 

 

 

STORE

 

 

 

MENU SELECT

ADJUST

HOST NAME

: Make alteration if necessary

 

when to use the DHCP server.

 

The number of valid characters

 

is 1 to 12 characters (spaces

 

not allowed).

DHCP

: Set the DHCP item to ON when to

 

acquire an IP address automatically

 

using the DHCP server.

 

Set to OFF if DHCP server is

 

not used.

IP ADDRESS

: Enter the IP address if DHCP

 

server is not used.

SUBNET MASK

: Enter the subnet mask if

 

DHCP server is not used.

GATEWAY

: Enter the gateway address if

 

DHCP server is not used.

NETWORK STATUS: Displays the network status of the unit such as DHCP or

IP ADDRESS.

STORE

: The settings are stored in the

 

memory.

Attention • Before using the DHCP server, make sure the DHCP server is already

functioning.

•For details of IP address, subnet mask, and gateway, ask the network administrator.

Returning the network function setting back to the factory setting

The user can return all settings of network function such as IP address, password and E-mail setting to the factory setting.

Press to select “STORE”.

Hold down the DEFAULT button for 3 seconds.

A confirmation screen will be displayed. To cancel, press the MENU button. The “NETWORK” screen will be displayed.

Press the ENTER button.

Connecting the PC

System requirements

The following system specifications are required in order to use the networking functions.

•PC

OS

: Windows XP/2000/Me (Millennium

 

Edition)/98SE (Second Edition)

CPU

: Pentium processor or faster

RAM

: 64 MB or more (128 MB or more for

Windows XP/2000)

Web browser: Internet Explorer 6.0 or newer, Netscape Communicator 7.0 or newer

•LAN cable

Type : Category 5 compatible straight cable

Length: 100 m or less

Attention • If you want to use the E-mail function, make sure the system can handle E-

mail.

Operation is not guaranteed for all computers that meet the above conditions.

Connection example

Projector

Personal computer

 

 

R/PR

G/Y

B/PB

SYNC/HD

VD

 

 

VIDEO IN

S-VIDEO IN

 

 

RGB 1 IN

 

 

RGB 2 IN

DVI-D IN

 

REMOTE 1

REMOTE 2 IN

IN

SERIAL

OUT

 

 

IN

OUT

 

 

 

 

 

 

10BASE-T or 100BASE-TX

LAN cable

LAN cable

(straight)

(straight)

Hub

Attention • Touching the LAN terminal with your hand (or body) when you are carrying

a static charge may damage the equipment due to a discharge of static electricity. Therefore, be careful not to touch the LAN terminal or metal parts of the LAN cable.

•Please connect the LAN cable to indoor devices.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Commercial Use Model No. PT-D4000EImportant Safety Notice Dear Panasonic CustomerFor Your SAFETY, Please Read the Following Text Carefully Important the Moulded Plug U.K. onlyContents Precautions with regard to safety Remove empty batteries from the remote control at once Do not use or handle the batteries improperlyDo not disassemble the lamp unit Always disconnect all cables before moving the projectorAccessories Do not use the old lamp unitDo not place the projector in extremely hot locations Electric shocks can result if this is not donePrecautions on handling Remote control Name and function of partsBottom Front and side of the projector Status LED lightsRear view of the main unit Controls on rear panel Side-mounted connection terminals Using the remote control unit Effective range of remote control operationLoading dry cells Setting projector ID number to remote control Connect to the projector to use with a cableInstallation Installation geometryProjection schemes Unit mmProjection distance by projection lens Screen aspect ratioScreen aspect ratio Calculation formulas for projection distance by lens types Setup precautions ConnectionPin assignments on the RGB2 input terminal are as follows Example of connecting with AV products Example of connecting with PCsPowering up the projector Making adjustment and selectionPress the I button. on the main unit or the remote control When operating at the projector, please refer toPowering off the projector Direct power off functionHow to adjust the lens How to adjust the FOCUS, Zoom and ShiftHow to remove the projection lens Automatic adjustment Press the Status button on the remote controlStatus function Press the Shutter button againFor RGB signals For DVI signalsFor S-Video/Video/YPBPRsignals On-screen menusMenu items setting Resetting to the factory defaultBasic menu operations Returning to the previousAdjusting the picture Adjusting the position Clock Phase ZoomKeystone Digital Cinema RealityInput Resolution XGA ModeSxga Mode Clamp PositionOPTION1 settings DVI Signal Level DVI EdidFUNC1 OSD PositionOPTION2 settings InstallationProjector ID AltitudeLamp Select Lamp RelayRS-232C Auto Power OFF PasswordSystem Information Date and TimeSetting the network Connecting the PCSystem requirements Connection exampleUsing Web Browser Control Accessing from the Web browserPassword change Click Change passwordBasic control Detail control Monitor informationError information Mail set up An error is detected by self- diagnosisOn the next Mail set up page Continuing Authentication server set upChange the authentication method as desired DNS server set up Ping testContents of mail sent Adjust clockNetwork config Network statusUsing the PJLink protocol Supported commandsPJLink security authentication Command Control Description RemarksSetting the security Password ChangeDisplay Setting Control Device SetupUsing the serial terminals Pin assignments and signal namesCommunication conditions Factory setting Examples of connectionControl commands Cable specificationsConnecting to a PC Computer Projector DTE specifications Pin assignments and controlIndication of lamp monitor Cleaning and replacement of air filter Procedure of cleaningClean the air filter Dismantle the air filterWhen to replace the Lamp unit Replacing the lamp unitLamp AfterLamp unit replacement steps Remove the two screws securing the fan unitLamp unit will be hot after it has been used Have a Phillips screwdriver ready ahead of timeCeiling Mount Bracket Safeguards Installation procedurePower does Not turn onNo image Image is blurredSpecifications PT-D4000ELength of power cord Cabinet Outside dimensionsRemote control Power source Replacement lamp unitCompatible Signal List PAL-M/PAL60 PAL/PAL-N/SECAMDimensions Installation dimensions diagramUnit mm For business users in the European Union Trademark Acknowledgement
Top Page Image Contents