Alcatel Carrier Internetworking Solutions TQBJ0223 manual Contents of mail sent, Adjust clock

Using Web Browser Control

Contents of mail sent

•Mail with the contents shown below is sent when the E-mail settings have been established.

=== Panasonic projector report(CONFIGURE) ===

Projector Type			: D4000
----- E-mail setup data -----
TEMPERATURE WARNING SETUP
MINIMUM TIME			at [ 60] minutes interval
INPUT AIR TEMPERATURE Over [ 45C / 113F ]
ERROR					[ ON ]
LAMP1 RUNTIME					[ ON ]		at REMAIN [ 100] H
LAMP1 RUNTIME					[ ON ]		at REMAIN [ 200] H
LAMP2 RUNTIME					[ ON ]		at REMAIN [ 300] H
LAMP2 RUNTIME					[ ON ]		at REMAIN [ 400] H
INPUT AIR TEMPERATURE					[ OFF ]
PERIODIC REPORT
Sunday	[ ON ]		Monday	[ OFF ]		Tuesday		[ ON ] Wednesday [ OFF ]
Thursday	[ ON	]	Friday	[ OFF ]		Saturday [ ON ]
00:00 [ ON ]		01:00 [ OFF ]			02:00 [ ON ]			03:00 [ OFF ]
04:00 [ OFF ]		05:00 [ ON ]			06:00 [ OFF ]			07:00 [ ON ]
08:00 [ ON ]		09:00 [ OFF ]			10:00 [ ON ]			11:00 [ OFF ]
12:00 [ OFF ]		13:00 [ ON ]			14:00 [ OFF ]			15:00 [ ON ]
16:00 [ ON ]		17:00 [ OFF ]			18:00 [ ON ]			19:00 [ OFF ]
20:00 [ OFF ]		21:00 [ ON ]			22:00 [ OFF ]			23:00 [ ON ]

----- check system -----
MAIN CPU BUS	[	OK	]
FAN	[	OK	]
OPTICS MODULE TEMPERATURE	[	OK	]
INPUT AIR TEMPERATURE	[	OK	]
AROUND LAMP TEMPERATURE	[	OK	]
LAMP2 REMAIN TIME	[	OK	]
LAMP1 REMAIN TIME	[	OK	]
•
•
•

•Mail with the contents shown below is sent when an error has occurred.

=== Panasonic projector report(ERROR) ===
Projector Type	: D4000
––––– check system –––––
MAIN CPU BUS			[	OK	]
FAN			[	OK	]
OPTICS MODULE TEMPERATURE			[	OK	]
INPUT AIR TEMPERATURE			[	OK	]
AROUND LAMP TEMPERATURE			[	OK	]
LAMP2 REMAIN TIME			[	OK	]
LAMP1 REMAIN TIME			[	OK	]
LAMP2 STATUS			[	OK	]
LAMP1 STATUS			[	OK	]
SHUTTER			[ FAILED ]
AIR FILTER			[	OK	]
OPTICS MODULE TEMP.SENSOR			[	OK	]
INPUT AIR TEMP.SENSOR			[	OK	]
AROUND LAMP TEMP.SENSOR			[	OK	]
BATTERY			[	OK	]
AIRFLOW SENSOR			[	OK	]
COLOR WHEEL			[	OK	]
COVER OPEN			[	OK	]
(Error code 00 10 00 00 00 00 00 00)
Input air temperature		: 30 degC /		86 degF
Optics module temperature : 30 degC / 86 degF
Around lamp temperature : 37 degC / 98 degF
SET RUNTIME		30 H
POWER ON		33 times
LAMP1 ON		34 times
LAMP1 HIGH		5 H
LAMP2 ON		24 times
LAMP2 HIGH		4 H
LAMP1 REMAIN	1476 H
LAMP2 REMAIN	1484 H

----- Network configuration -----

IP address 192.168.0.8

MAC address 00:00:00:00:00:00 Thu Mar 02 14:11:02 2006

----- Memo -----

Adjust clock page

Click [Network set up], then [Adjust clock] to display the Adjust clock page.

Time zone selection

Button to update time zone setting

New date field

Button to update time and date settings

New time field

Note	• If the time becomes incorrect immediately after setting the correct time, then the battery needs to
	be changed. Contact the dealer where you bought the projector to have the battery changed.

44