BenQ MP670 user manual Controls and functions, Projector

Page 10

English

Controls and functions

Projector

1

 

 

8

 

 

 

2

 

 

9

 

 

 

3

 

 

10

 

 

11

POWER

TEMP

LAMP

4

 

 

12

 

 

 

 

 

 

13

5

 

 

 

6

 

 

14

7

1.POWER indicator light

Lights up or flashes when the projector is under operation. See "Indicators" on page 64 for details.

2.MENU/EXIT

Turns on the On-Screen Display (OSD) menu. Goes back to previous OSD menu, exits and saves menu settings.

See "Using the menus" on page 26 for details.

3. Left/

Starts the FAQ function. See "Utilizing FAQ function" on page 42 for details.

4.POWER

Toggles the projector between standby mode and on.

See "Starting up the projector" on page 25 and "Shutting down the projector" on page 49 for details.

5.MODE/ENTER

Selects an available picture setup mode. See "Selecting a picture mode" on page 36 for details.

Enacts the selected On-Screen Display (OSD) menu item. See "Using the menus" on page 26 for details.

6.BLANK

Used to hide the screen picture. See "Hiding the image" on page 41 for details.

7.Keystone/Arrow keys ( / Down) Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 32 for details.

8.FOCUS/ZOOM Ring

Used to adjust the projected image appearance. See "Fine-tuning the image size and clarity" on page 32 for details.

9.TEMPerature indicator light

Lights up red if the projector's temperature becomes too high. See "Indicators" on page 64 for details.

10.Keystone/Arrow keys ( / Up) Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 32 for details.

11.LAMP indicator light

Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators" on page 64 for details.

12.AUTO

Automatically determines the best picture timings for the displayed image. See "Auto- adjusting the image" on page 31 for details.

13. Right/

Activates panel key lock. See "Locking control keys" on page 42 for details.

When the On-Screen Display (OSD)

menu is activated, the #3, #7, #10, and #13 keys are used as directional arrows to select the desired menu items and to make adjustments. See "Using the menus" on page 26 for details.

14.SOURCE

Displays the source selection bar. See "Switching input signal" on page 30 for details.

10 Introduction

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Welcome MP626/MP670 Digital ProjectorTable of contents Do not look straight at the projector Important safety instructionsRefer servicing to qualified service personnel Lens during operation. The intenseEnglish Do not block the ventilation holes Ceiling mounting the projector Projector features IntroductionShipping contents Front/upper side Projector exterior viewRear/lower side Controls and functions ProjectorRemote control Source Remote control effective rangeTimer On/Set up Up/ DownReplacing the remote control battery Replace the trayPositioning your projector Choosing a locationObtaining a preferred projected image size Aspect display area Display areaEnglish MP626/670 projection dimensions AverageConnection Connecting a computer or monitorConnecting a computer To connect the projector to a notebook or desktop computerWith a VGA cable Connecting a monitorTo connect the projector to a monitor With a VGA to DVI-A cableBest video quality Connecting Video source devicesConnecting Audio Better video qualityAV device Connecting Hdmi source devicesTo connect the projector to an Hdmi source device Hdmi cableTo connect the projector to an Audio source device Connecting Component Video source devicesTo connect the projector to a Component Video source device Audio cableTo connect the projector to an S-Video source device Connecting S-Video source devicesVideo device Audio device Connecting Composite Video source devices To connect the projector to a composite Video source deviceOperation Starting up the projectorUse / to highlight the System Setup Basic menu Using the menusUsing a security cable lock Securing the projectorUtilizing the password function Setting a passwordEntering the password recall procedure If you forget the passwordChanging the password Disabling the password function Switching input signal Changing Color SpaceAdjusting the projection angle Adjusting the projected imageAuto-adjusting the image Correcting keystone Fine-tuning the image size and clarityUsing Auto Keystone Keystone functionMagnifying and searching for details Playing 3D function Selecting the aspect ratioAbout the aspect ratio RealPicture modes for different types of signals Using Wall ColorSelecting a picture mode Optimizing the imageAdjusting Brightness Fine-tuning the image quality in user modesSetting the User 1/User 2 mode Adjusting ContrastAdjusting Sharpness Adjusting ColorAdjusting Tint Adjusting Brilliant Color3D Color Management Press MODE/ENTER and the 3D Color Management page displaysGo to the System Setup Basic Setting the presentation timerTo cancel the timer, perform the following steps Presentation Timer menu and press ModeRemote paging operations Hiding the imageLocking control keys Utilizing FAQ functionSetup Basic Panel Key Lock menu, and select Freezing the imageTo highlight High Altitude Mode To activate the High Altitude ModeUntil the System Setup Advanced menu Operating in a high altitude environmentTurning off the Power on/off ring tone Adjusting the soundAdjusting the sound level Muting the soundControlling the projector through a Lan environment Configuring the Lan Control SettingsIf you are in a Dhcp environment Controlling the projector remotely through a web browser If you are in a non-DHCP environmentPress Exit to go back to the remote network operation Press Exit to go back to the remote network operation Personalizing the projector menu display Shutting down the projectorMenu operation Color T1/T2/T3/T4 Temperature Primary color3D Color Hue Management Saturation Gain Save Settings Menu systemRear Ceiling/Front Ceiling FAQ-Image and Installation FAQ-Features and Service SourceProjector Position Front Table/Rear Table Right/Bottom-leftLamp Settings Quick Cooling Off/On High Altitude Mode Audio SettingsLamp Mode Reset All SettingsOff DisableDescription of each menu AutoColor Space DynamicTimer position Top-Left Timer period 15 minTimer display Always Timer counting direction Count DownLamp Mode Normal VolumePower On/Off ring tone On Reset lamp timerSource ResolutionPicture Mode Color SystemMaintenance Care of the projectorLamp information Setting Lamp mode as EconomicSetting Auto Power Off Getting to know the lamp hourTiming of replacing the lamp Status MessageDo not turn the power on with the lamp cover removed Replacing the lampEnglish Resetting the lamp timer Setup Advanced Lamp SettingsRed IndicatorsOff Green Troubleshooting Specifications Projector specificationsDimensions Timing chart Supported timing for PC inputResolution Horizontal Vertical Pixel Mode Supported timing for Component-YPbPr input Supported timing for Video and S-Video inputsSupported timing for Hdmi Hdcp input SXGA851600 x 75.000 60.000 162.000 Copyright Warranty and Copyright informationLimited warranty DisclaimerEEC statement Regulation statementsFCC statement Weee directiveEnglish
Top Page Image Contents