BenQ MP670 user manual Color Space, Dynamic

English

	Picture Mode
	(Presentation)
	Reference
	Mode
	(Dynamic)
	Brightness
	(50)
	Contrast
	(0)
2.	Color
PICTURE	(0)
	Tint
menu	(0)
	Sharpness
	(15)
	Brilliant Color
	(On)
	Color
	Temperature
	3D Color
	Management
	Save Settings
	Quick Auto
.3Search
SOURCE menu	(On)
	Color Space

Conversion (Auto detect by HDMI source)

Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode" on page 36 for details.

Selects a picture mode that most suits your need for the image quality and further fine-tune the image based on the selections listed on the same page below. See "Setting the User 1/User 2 mode" on page 37 for details.

Adjusts the brightness of the image. See "Adjusting Brightness" on page 37 for details.

Adjusts the degree of difference between dark and light in the image. See "Adjusting Contrast" on page 37 for details.

Adjusts the color saturation level -- the amount of each color in a video image. See "Adjusting Color" on page 38 for details.

The function is only available when Video or S-Video with NTSC system is selected.

Adjusts the red and green color tones of the image. See "Adjusting Tint" on page 38 for details.

The function is only available when Video or S-Video with NTSC system is selected.

Adjusts the image to make it look sharper or softer. See "Adjusting Sharpness" on page 38 for details.

The function is only available when Video or S-Video with NTSC system is selected.

Adjusts white peaking while maintaining correct color presentation. See "Adjusting Brilliant Color" on page 38 for details.

See "Selecting a Color Temperature" on page 38 for details.

See "3D Color Management" on page 39 for details.

Saves the settings made for User 1 or User 2 mode.

See "Switching input signal" on page 30 for details.

Only action for HDMI Input source.

54 Operation