BenQ MP670 user manual Description of each menu, Off, Auto, Disable

Description of each menu

	FUNCTION	DESCRIPTION (default setting/value)
	(default setting/
	value)
	Wall Color	Corrects the projected picture’s color when the projection surface is
	(Off)	not white. See "Using Wall Color" on page 36 for details.
	Aspect Ratio	There are four options to set the image's aspect ratio depending on
	(Auto)	your input signal source. See "Selecting the aspect ratio" on page 34
		for details.
	Auto	Corrects any keystoning of the image automatically. See "Correcting
	Keystone	keystone" on page 32 for details.
	(On)
	Keystone	Corrects any keystoning of the image manually. See "Correcting
	(0)	keystone" on page 32 for details.
		Displays the position adjustment page. To move the projected image,
1.		use the directional arrow keys. The values shown on the lower
	Position	position of the page change with every key press you made until they
DISPLAY	(0)	reach their maximum or minimum.
		This function is only available when a PC signal (analog RGB) is
		selected.
menu	Phase	Adjusts the clock phase to reduce image
		distortion.
	(depends on the
	selected input	This function is only available when a PC
	signal)	signal (analog RGB) is selected.
	H. Size	Adjusts the horizontal width of the image.
	(depending on	This function is only available when a PC signal (analog RGB) is
	the selected
		selected.
	signal)
	Digital Zoom	Magnifies or reduces the projected image. See "Magnifying and
	(1.0X)	searching for details" on page 33 for details.
	3D Sync	Enable 3D function.
	(Off)
	3D Sync
	Invert	Invert 3D sync.
	(Disable)

English

Operation 53