BenQ MP670 Setting the presentation timer, To cancel the timer, perform the following steps

Page 40

English

Setting the presentation timer

The presentation timer can indicate the presentation

Presentation Timer

 

time on the screen to help you achieve better time

Timer period

15

management when giving presentations. Follow these

Timer display

Always

Timer position

Top-Left

steps to utilize this function:

Sound reminder

Off

 

Timer counting direction

Count Down

1. Go to the SYSTEM SETUP: Basic >

On

Off

Presentation Timer menu and press MODE/

 

MENU Back

ENTER to display the Presentation Timer

 

 

page.

 

 

2.Press to highlight Timer period and decide the timer period by pressing / . The length of time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes in 5-minute increments.

If the timer is already on, the timer will restart whenever the Timer period is reset.

3.Press to highlight Timer display and choose if you want the timer to show up on the screen by pressing / .

Selection

Description

Always

Displays the timer on screen throughout the presentation time.

 

 

1 min/2 min/3 min

Displays the timer on screen in the last 1/2/3 minute(s).

 

 

Never

Hides the timer throughout the presentation time.

 

 

4.Press to highlight Timer position and set the timer position by pressing / .

Top-Left Bottom-Left Top-Right Bottom- Right

5.Press to highlight Timer counting direction and select your desired counting direction by pressing / .

5 min

5 min

5 min

5 min

Selection

Description

Count Up

Increases from 0 to the preset time.

Count Down

Decrease from the preset time to 0.

6.Press to highlight Sound reminder to select On. A notice sound alerts 30 seconds before and at the end of the Presentation Timer countdown.

7.To activate the presentation timer, press and

press / to select On and press MODE/

ENTER.

8.A confirmation message displays. Highlight Yes and press MODE/ENTER to confirm. You will

see the message “Timer is On” displaying on the screen. The timer starts counting at the time the timer is on.

Are you sure to turn on the Presentation Timer?

YesNo

To cancel the timer, perform the following steps.

1.Go back to the Presentation Timer page.

2.Press and press / to highlight Off and press MODE/ENTER. A confirmation message displays.

40 Operation

Image 40
Contents Welcome MP626/MP670 Digital ProjectorTable of contents Important safety instructions Refer servicing to qualified service personnelDo not look straight at the projector Lens during operation. The intenseEnglish Do not block the ventilation holes Ceiling mounting the projector Projector features IntroductionShipping contents Front/upper side Projector exterior viewRear/lower side Controls and functions ProjectorRemote control Remote control effective range Timer On/Set upSource Up/ DownReplacing the remote control battery Replace the trayPositioning your projector Choosing a locationObtaining a preferred projected image size Aspect display area Display areaEnglish MP626/670 projection dimensions AverageConnecting a computer or monitor Connecting a computerConnection To connect the projector to a notebook or desktop computerConnecting a monitor To connect the projector to a monitorWith a VGA cable With a VGA to DVI-A cableConnecting Video source devices Connecting AudioBest video quality Better video qualityConnecting Hdmi source devices To connect the projector to an Hdmi source deviceAV device Hdmi cableConnecting Component Video source devices To connect the projector to a Component Video source deviceTo connect the projector to an Audio source device Audio cableTo connect the projector to an S-Video source device Connecting S-Video source devicesVideo device Audio device Connecting Composite Video source devices To connect the projector to a composite Video source deviceOperation Starting up the projectorUsing the menus Using a security cable lockUse / to highlight the System Setup Basic menu Securing the projectorUtilizing the password function Setting a passwordEntering the password recall procedure If you forget the passwordChanging the password Disabling the password function Switching input signal Changing Color SpaceAdjusting the projection angle Adjusting the projected imageAuto-adjusting the image Fine-tuning the image size and clarity Using Auto KeystoneCorrecting keystone Keystone functionMagnifying and searching for details Playing 3D function Selecting the aspect ratioAbout the aspect ratio RealUsing Wall Color Selecting a picture modePicture modes for different types of signals Optimizing the imageFine-tuning the image quality in user modes Setting the User 1/User 2 modeAdjusting Brightness Adjusting ContrastAdjusting Color Adjusting TintAdjusting Sharpness Adjusting Brilliant Color3D Color Management Press MODE/ENTER and the 3D Color Management page displaysSetting the presentation timer To cancel the timer, perform the following stepsGo to the System Setup Basic Presentation Timer menu and press ModeRemote paging operations Hiding the imageUtilizing FAQ function Setup Basic Panel Key Lock menu, and selectLocking control keys Freezing the imageTo activate the High Altitude Mode Until the System Setup Advanced menuTo highlight High Altitude Mode Operating in a high altitude environmentAdjusting the sound Adjusting the sound levelTurning off the Power on/off ring tone Muting the soundControlling the projector through a Lan environment Configuring the Lan Control SettingsIf you are in a Dhcp environment Controlling the projector remotely through a web browser If you are in a non-DHCP environmentPress Exit to go back to the remote network operation Press Exit to go back to the remote network operation Personalizing the projector menu display Shutting down the projectorColor T1/T2/T3/T4 Temperature Primary color 3D Color Hue Management Saturation Gain Save SettingsMenu operation Menu systemFAQ-Image and Installation FAQ-Features and Service Source Projector Position Front Table/Rear TableRear Ceiling/Front Ceiling Right/Bottom-leftQuick Cooling Off/On High Altitude Mode Audio Settings Lamp ModeLamp Settings Reset All SettingsDisable Description of each menuOff AutoColor Space DynamicTimer period 15 min Timer display AlwaysTimer position Top-Left Timer counting direction Count DownVolume Power On/Off ring tone OnLamp Mode Normal Reset lamp timerResolution Picture ModeSource Color SystemMaintenance Care of the projectorSetting Lamp mode as Economic Setting Auto Power OffLamp information Getting to know the lamp hourTiming of replacing the lamp Status MessageDo not turn the power on with the lamp cover removed Replacing the lampEnglish Resetting the lamp timer Setup Advanced Lamp SettingsRed IndicatorsOff Green Troubleshooting Specifications Projector specificationsDimensions Timing chart Supported timing for PC inputResolution Horizontal Vertical Pixel Mode Supported timing for Component-YPbPr input Supported timing for Video and S-Video inputsSupported timing for Hdmi Hdcp input SXGA851600 x 75.000 60.000 162.000 Warranty and Copyright information Limited warrantyCopyright DisclaimerRegulation statements FCC statementEEC statement Weee directiveEnglish