BenQ MP670 user manual Timer period 15 min, Timer display Always, Timer position Top-Left

Page 55

FUNCTION

(default setting/ value)

Presentation

Timer

(Off)

Language

	4.	Projector
	SYSTEMSETUP: menu	Position
		Position
		(Front Table)
		Menu
	Basic	Settings
	Basic	Auto Power
		Auto Power
		Off
		(Disable)
		Blank Timer
		(Disable)
		Panel Key
		Lock
		(Off)
		Sleep Timer
		(Disable)
		Splash
		Screen
		(BenQ logo)

DESCRIPTION (default setting/value)

Reminds the presenter to finish the presentation within a certain time frame. See "Setting the presentation timer" on page 40 for details.

Timer period (15 min.)

Sets a preferred length of time for presentation.

Timer display (Always)

Sets whether to display the timer on screen.

Timer position (Top-Left)

Sets the position where the timer displays on screen.

Timer counting direction (Count Down)

Sets the timer counting direction.

Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 26 for details.

The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See "Choosing a location" on page 14 for details.

Menu display time (15 sec)

Sets the length of time the OSD will remain active after your last key press. The range is from 5 to 30 seconds in 5-second increments.

Menu position (Center)

Sets the On-Screen Display (OSD) menu position.

Allows the projector to turn off automatically if no input signal is detected after a set period of time. See "Setting Auto Power Off" on page 59 for details.

Sets the image blank time when the Blank feature is activated, once elapsed the image will return to the screen. See "Hiding the image" on page 41 for details.

Disables or enables all panel key functions except POWER on the projector and keys on the remote control. See "Locking control keys" on page 42 for details.

Sets the auto-shutdown timer. The timer can be set to a value between 30 minutes and 12 hours.

Allows you to select which logo screen will display during projector start-up. Four options are available: BenQ logo, Black screen, or Blue screen.

English

Operation 55

Image 55

Contents MP626/MP670 Digital Projector WelcomeTable of contents Lens during operation. The intense Important safety instructionsRefer servicing to qualified service personnel Do not look straight at the projectorEnglish Do not block the ventilation holes Ceiling mounting the projector Introduction Projector featuresShipping contents Front/upper side Projector exterior viewRear/lower side Projector Controls and functionsRemote control Up/ Down Remote control effective rangeTimer On/Set up SourceReplace the tray Replacing the remote control batteryChoosing a location Positioning your projectorAspect display area Display area Obtaining a preferred projected image sizeEnglish Average MP626/670 projection dimensionsTo connect the projector to a notebook or desktop computer Connecting a computer or monitorConnecting a computer ConnectionWith a VGA to DVI-A cable Connecting a monitorTo connect the projector to a monitor With a VGA cableBetter video quality Connecting Video source devicesConnecting Audio Best video qualityHdmi cable Connecting Hdmi source devicesTo connect the projector to an Hdmi source device AV deviceAudio cable Connecting Component Video source devicesTo connect the projector to a Component Video source device To connect the projector to an Audio source deviceTo connect the projector to an S-Video source device Connecting S-Video source devicesVideo device Audio device To connect the projector to a composite Video source device Connecting Composite Video source devicesStarting up the projector OperationSecuring the projector Using the menusUsing a security cable lock Use / to highlight the System Setup Basic menuSetting a password Utilizing the password functionEntering the password recall procedure If you forget the passwordChanging the password Disabling the password function Changing Color Space Switching input signalAdjusting the projection angle Adjusting the projected imageAuto-adjusting the image Keystone function Fine-tuning the image size and clarityUsing Auto Keystone Correcting keystoneMagnifying and searching for details Selecting the aspect ratio Playing 3D functionReal About the aspect ratioOptimizing the image Using Wall ColorSelecting a picture mode Picture modes for different types of signalsAdjusting Contrast Fine-tuning the image quality in user modesSetting the User 1/User 2 mode Adjusting BrightnessAdjusting Brilliant Color Adjusting ColorAdjusting Tint Adjusting SharpnessPress MODE/ENTER and the 3D Color Management page displays 3D Color ManagementPresentation Timer menu and press Mode Setting the presentation timerTo cancel the timer, perform the following steps Go to the System Setup BasicHiding the image Remote paging operationsFreezing the image Utilizing FAQ functionSetup Basic Panel Key Lock menu, and select Locking control keysOperating in a high altitude environment To activate the High Altitude ModeUntil the System Setup Advanced menu To highlight High Altitude ModeMuting the sound Adjusting the soundAdjusting the sound level Turning off the Power on/off ring toneControlling the projector through a Lan environment Configuring the Lan Control SettingsIf you are in a Dhcp environment If you are in a non-DHCP environment Controlling the projector remotely through a web browserPress Exit to go back to the remote network operation Press Exit to go back to the remote network operation Shutting down the projector Personalizing the projector menu displayMenu system Color T1/T2/T3/T4 Temperature Primary color3D Color Hue Management Saturation Gain Save Settings Menu operationRight/Bottom-left FAQ-Image and Installation FAQ-Features and Service SourceProjector Position Front Table/Rear Table Rear Ceiling/Front CeilingReset All Settings Quick Cooling Off/On High Altitude Mode Audio SettingsLamp Mode Lamp SettingsAuto DisableDescription of each menu OffDynamic Color SpaceTimer counting direction Count Down Timer period 15 minTimer display Always Timer position Top-LeftReset lamp timer VolumePower On/Off ring tone On Lamp Mode NormalColor System ResolutionPicture Mode SourceCare of the projector MaintenanceGetting to know the lamp hour Setting Lamp mode as EconomicSetting Auto Power Off Lamp informationStatus Message Timing of replacing the lampReplacing the lamp Do not turn the power on with the lamp cover removedEnglish Setup Advanced Lamp Settings Resetting the lamp timerRed IndicatorsOff Green Troubleshooting Projector specifications SpecificationsDimensions Supported timing for PC input Timing chartResolution Horizontal Vertical Pixel Mode Supported timing for Video and S-Video inputs Supported timing for Component-YPbPr inputSXGA85 Supported timing for Hdmi Hdcp input1600 x 75.000 60.000 162.000 Disclaimer Warranty and Copyright informationLimited warranty CopyrightWeee directive Regulation statementsFCC statement EEC statementEnglish