Planar PR9020 user manual Aspect, Auto, Keystone, Execute, Picture Mode

EASY MENU

EASY MENU

From the EASY MENU, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons on the projector or remote control. Then perform it according to the following table.

Item		Description
ASPECT	Using the ◄/► buttons switches the mode for aspect ratio.
	See the ASPECT item in IMAGE menu (29).
AUTO	Using the ► button executes the auto keystone function.
KEYSTONE
	See the AUTO KEYSTONE EXECUTE item in SETUP menu (35).
EXECUTE
KEYSTONE	Using the ◄/► buttons corrects the vertical keystone distortion.
	See the KEYSTONE	item in SETUP menu (35).
KEYSTONE	Using the ◄/► buttons corrects the horizontal keystone distortion.
	See the KEYSTONE	item in SETUP menu (36).

Using the ◄/► buttons switches the picture mode.

The picture modes are combinations of GAMMA and COLOR TEMP settings. Choose a suitable mode according to the projected source.

	NORMAL ó CINEMA ó DYNAMIC ó BOARD(BLACK)
	DAYTIME ó WHITEBOARD ó BOARD(GREEN)
		COLOR TEMP	GAMMA
	NORMAL	MID DEFAULT	#1 DEFAULT
PICTURE MODE	CINEMA	LOW DEFAULT	#2 DEFAULT
	DYNAMIC	HIGH DEFAULT	#3 DEFAULT
	BOARD(BLACK)	Hi-BRIGHT-1 DEFAULT	#4 DEFAULT
	BOARD(GREEN)	Hi-BRIGHT-2 DEFAULT	#4 DEFAULT
	WHITEBOARD	MID DEFAULT	#5 DEFAULT
	DAYTIME	Hi-BRIGHT-3 DEFAULT	#6 DEFAULT

•When the combination of GAMMA and COLOR TEMP differs from pre-assigned modes above, the display on the menu for the

PICTURE MODE is “CUSTOM”. Please refer to the GAMMA (26) and COLOR TEMP (27) items in PICTURE menu.

•When this function is performed, a certain extra such as a line may appear.

(continued on next page)

24