INPUT Menu
Description
Set the frame lock function on/off for each port.
(1)Use the ▲/▼ buttons to select one of following ports.
RGB1 ó RGB2 ó HDMI
QUIT 
(2)Use the ◄/► buttons to turns the frame
lock function on/off . TURN ON ó TURN OFF
•This item can be performed only on a signal with a vertical frequency of 50 to 60 Hz.
•When the TURN ON is selected, a moving pictures are displayed more smoothly.
•This function may cause a certain degradation of the picture. In such a case, please select the TURN OFF.
Set the RGB input signal type for the RGB port.
(1)Use the ◄/► buttons to select the RGB port to be set.
RGB1 ó RGB2
(2) Use the ▲/▼ buttons to select the RGB input signal type.
AUTO ó SYNC ON G OFF
•Selecting the AUTO mode allows you to input a sync on G signal or component signal from the port.
•In the AUTO mode, the picture may be distorted with certain input signals. In such a case, remove the signal connector so that no signal is received and select the SYNC ON G OFF, and then reconnect the signal.
(continued on next page)
33