Planar PR9020 user manual Description Security, Turning Off the PIN Lock Function

Page 52

PIN BOX

PIN CODE AGAIN BOX

OPTION Menu

OPTION Menu (continued)

Item

Description

SECURITY (continued)

3.1-3 Input a 4 part PIN Code using the ▲/▼/◄/► /RGB and INPUT buttons.

The PIN CODE AGAIN BOX will appear. Reenter the same PIN Code. This will complete the PIN Code registration.

•If there is no key input for about 55 seconds while the PIN BOX or the PIN CODE AGAIN BOX is displayed the menu will close. If necessary repeat the process from 3.1-1.

Afterwards, anytime the projector is restarted after

the power switch is turned off the PIN BOX will be displayed. Enter the registered PIN Code.

The projector can be used after entering the registered PIN Code. If an incorrect PIN Code is input the PIN BOX will be displayed again.

If an incorrect PIN Code is input 3 times the projector will turn off. Afterwards the projector will turn off every time an incorrect PIN Code is input. The projector will also turn off if there is no key input for about 5 minutes while the PIN BOX is displayed.

This function will activate only when the projector is started after the power switch was turned off.

•Please do not forget your PIN Code.

3.2 Turning Off the PIN LOCK Function

3.2-1 Follow the procedure in 3.1-1 to display the PIN LOCK on/off menu. Use the ▲/▼ buttons to select TURN OFF and the PIN BOX will be displayed.

Enter the registered PIN Code to turn the PIN LOCK function off. If an incorrect PASSWORD is input 3 times, the menu will close.

3.3 If you have forgotten your PIN Code

3.3-1 While the PIN BOX is displayed, press and hold the RESET button for three seconds or press and hold the INPUT and ► buttons for three seconds. The 10 digit Inquiring Code will be displayed.

•If there is no key input for about 5 minutes while the Inquiring Code is displayed the projector will turn off.

Inquiring Code

(PIN Code)

3.3-2 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed.

(continued on next page)

50

Image 52

Contents PR9020 LCD Projector Page Thank you for purchasing this projector About this manualTrademark acknowledgment Contents Contents of package Fastening the lens coverPart names ProjectorHOT HOTControl panel Rear panelControl port &10 Hdmi port &10 Video port &10Back Remote control Remote controlLaser pointer &13 It is a beam outlet Setting up Arrangement On a horizontalSurface Suspended from the ceilingAdjusting the projectors elevator Using the security bar and slotConnecting your devices USB storage SD card Remote controlMonitor Speakers wiht an amplifierConnecting your devices About Plug-and-Play capabilityConnecting power supply AC inlet Connector of the power cord To the outletRemote control Laser pointerPutting batteries Hitachi MAXELL, Part No.LR6About the remote control signal Changing the frequency of remote control signalFront and top sensors Back sensorUsing as a wired remote control Using as a simple PC mouse & keyboardPower on/off Turning on the powerTurning off the power STANDBY/ON button Power indicator Power switchAdjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Selecting an input signal For an RGB signal  For an Hdmi signalAdjusting the zoom and focus Adjusting the lens shiftUsing the automatic adjustment feature  For a video signal and s-video signalAdjusting the position Correcting the keystone distortionsUsing the magnify feature Freezing the screenTemporarily blanking the screen Using the menu function Easy MenuAdvanced Menu Enter buttonPicture Mode AspectAuto KeystoneEasy Menu Picture Menu GammaPicture Menu Color TempActive Iris LOAD-1, LOAD-2, LOAD-3, LOAD-4MY Memory SAVE-1, SAVE-2, SAVE-3, SAVE-4Over Scan Image MenuPosition Phase Auto AdjustImage Menu SizeInput Menu Input Menu ComponentVideo Format HdmiDescription Resolution Setup Menu Setup Menu Audio Menu Using the /// buttons adjusts the menu position Using the / buttons switches the mode for the blank screenScreen Menu Or keep no operation for about 10 secondsScreen Menu Start UPMyScreen Capturing error has occurred. Please try againMyScreen registration is finished Message Auto Search Option MenuAuto on Auto OFF Option MenuLamp Time MY Button ServiceFAN Speed Filter Message GhostLens Type Factory Reset KEY LockRemote Receiv Remote FreqUsing Security Features Inputting the PasswordChanging the Password SecurityUsing the MyScreen Password Function Description If you have forgotten your PasswordTurning on the MyScreen Password Function Setting the PasswordUsing the PIN Lock Function Turning the Password offSecurity Registering the PIN CodeTurning Off the PIN Lock Function Description SecurityIf you have forgotten your PIN Code Setting the Transition Detector Password Using the Transition Detector FunctionTurning On the Transition Detector Function Setting the Transition Detector off Using the MY Text Password functionWriting the MY Text Turning on the MY Text Password Displaying the MY TextPassword and the screen will return to Setup Network MenuNetwork Menu Name ProjectorEnter or Input button To switch the image displayed Press the or ESC button on the remote controlDescription Shot Use the / buttonsInformation Maintenance Case of replacement by yourselfLamp Part number =Lamp warning LampCleaning the air filter Air filterAir filter Internal clock battery Remove the battery coverCaring for the cabinet and remote control Other careInside of the projector Caring for the lensTroubleshooting Message Description There is no input signalInternal temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps Electrical power cord is not plugged Power switch is not set to the on positionSignal cables are not correctly connected Signal source does not correctly workPhenomena that may be easily mistaken for machine defects Color settings are not correctly adjusted Color Space setting is not suitableNot properly adjusted Whisper function is workingWarranty and after-service SpecificationsSpecifications Air filter 997-5215-00MU03642Specifications 319 418 139 154 Unit mmPlanar Systems, Inc Corporate Headquarters NW Compton Drive Beaverton, or