Planar PR9020 Color settings are not correctly adjusted, Color Space setting is not suitable

Page 73

Troubleshooting

Phenomena that may be easily mistaken for machine defects (continued)

Phenomenon

Cases not involving a machine defect

Reference

page

 

 

 

 

 

Video screen

The FREEZE function is working.

21

display freezes.

Press the FREEZE button to restore the screen to normal.

 

 

Color settings are not correctly adjusted.

25, 27,

Colors have a

Perform picture adjustments by changing the COLOR

faded- out

TEMP, COLOR, TINT and/or COLOR SPACE settings,

31

appearance, or

using the menu functions.

 

Color tone is

COLOR SPACE setting is not suitable.

 

poor.

Change the COLOR SPACE setting to AUTO, RGB,

31

 

SMPTE240, REC709 or REC601.

 

 

The brightness and/or contrast are adjusted to an

 

 

extremely low level.

25, 26

 

Adjust BRIGHTNESS and/or CONTRAST settings to a

 

 

 

higher level using the menu function.

 

Pictures appear

The WHISPER function is working.

 

dark.

Select NORMAL for the WHISPER item in the SETUP

25, 36

 

menu.

 

 

The lamp is approaching the end of its product

 

 

lifetime.

60, 61

 

Replace the lamp.

 

 

Either the focus and/or horizontal phase settings are

 

 

not properly adjusted.

19, 30

Pictures appear

Adjust the focus using the focus ring, and/or H PHASE

 

blurry.

using the menu function.

 

 

The lens is dirty or misty.

65

 

Clean the lens referring to the section “Caring for the lens”.

 

 

Pictures are

The exhaust ventilation holes at front is blocked by

 

some objects.

4

trembling.

Remove any objects from front side of the projector.

 

 

 

NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect.

71

Page 72 Page 74
Image 73
Page 72 Page 74
Contents PR9020 LCD Projector Page Thank you for purchasing this projector About this manualTrademark acknowledgment Contents Fastening the lens cover Contents of packageProjector Part namesHOT HOTRear panel Control panelControl port &10 Hdmi port &10 Video port &10Back Remote control Remote controlLaser pointer &13 It is a beam outlet Setting up On a horizontal ArrangementSurface Suspended from the ceilingUsing the security bar and slot Adjusting the projectors elevatorUSB storage SD card Remote control Connecting your devicesMonitor Speakers wiht an amplifierAbout Plug-and-Play capability Connecting your devicesAC inlet Connector of the power cord To the outlet Connecting power supplyLaser pointer Remote controlPutting batteries Hitachi MAXELL, Part No.LR6Changing the frequency of remote control signal About the remote control signalFront and top sensors Back sensorUsing as a simple PC mouse & keyboard Using as a wired remote controlTurning on the power Power on/offTurning off the power STANDBY/ON button Power indicator Power switchSelecting an input signal Adjusting the volumeOperating Temporarily muting the soundSelecting an input signal Searching an input signal For an RGB signal  For an Hdmi signalAdjusting the lens shift Adjusting the zoom and focusUsing the automatic adjustment feature  For a video signal and s-video signalCorrecting the keystone distortions Adjusting the positionFreezing the screen Using the magnify featureTemporarily blanking the screen Easy Menu Using the menu functionAdvanced Menu Enter buttonAspect Picture ModeAuto KeystoneEasy Menu Gamma Picture MenuColor Temp Picture MenuLOAD-1, LOAD-2, LOAD-3, LOAD-4 Active IrisMY Memory SAVE-1, SAVE-2, SAVE-3, SAVE-4Over Scan Image MenuPosition Auto Adjust PhaseImage Menu SizeInput Menu Component Input MenuVideo Format HdmiDescription Resolution Setup Menu Setup Menu Audio Menu Using the / buttons switches the mode for the blank screen Using the /// buttons adjusts the menu positionScreen Menu Or keep no operation for about 10 secondsStart UP Screen MenuMyScreen Capturing error has occurred. Please try againMyScreen registration is finished Message Auto Search Option MenuAuto on Auto OFF Option MenuLamp Time MY Button ServiceFAN Speed Filter Message GhostLens Type KEY Lock Factory ResetRemote Receiv Remote FreqInputting the Password Using Security FeaturesChanging the Password SecurityDescription If you have forgotten your Password Using the MyScreen Password FunctionTurning on the MyScreen Password Function Setting the PasswordTurning the Password off Using the PIN Lock FunctionSecurity Registering the PIN CodeTurning Off the PIN Lock Function Description SecurityIf you have forgotten your PIN Code Setting the Transition Detector Password Using the Transition Detector FunctionTurning On the Transition Detector Function Setting the Transition Detector off Using the MY Text Password functionWriting the MY Text Displaying the MY Text Turning on the MY Text PasswordPassword and the screen will return to Network Menu SetupNetwork Menu Name ProjectorEnter or Input button Press the or ESC button on the remote control To switch the image displayedDescription Shot Use the / buttonsInformation Case of replacement by yourself MaintenanceLamp Part number =Lamp Lamp warningAir filter Cleaning the air filterAir filter Remove the battery cover Internal clock batteryOther care Caring for the cabinet and remote controlInside of the projector Caring for the lensMessage Description There is no input signal TroubleshootingInternal temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps Power switch is not set to the on position Electrical power cord is not pluggedSignal cables are not correctly connected Signal source does not correctly workPhenomena that may be easily mistaken for machine defects Color Space setting is not suitable Color settings are not correctly adjustedNot properly adjusted Whisper function is workingSpecifications Warranty and after-serviceSpecifications Air filter 997-5215-00MU03642319 418 139 154 Unit mm SpecificationsCorporate Headquarters NW Compton Drive Beaverton, or Planar Systems, Inc
Top Page Image Contents