Planar PR9020 user manual Using the MY Text Password function, Setting the Transition Detector off

OPTION Menu

OPTION Menu (continued)

Item		Description
	4.3 Setting the Transition Detector off
4.3-1		Follow the procedure in 4.1-1 to display the Transition Detector on/off
		menu.
4.3-2		Select TURN OFF to display the ENTER PASSWORD BOX (large).
		Enter the registered PASSWORD and the screen will return to the
		Transition Detector on/off menu.
	If an incorrect PASSWORD is input the menu will close. If necessary repeat
	the process from 4.3-1.

4.4 If you have forgotten your PASSWORD

4.4-1 Follow the procedure in 4.1-1 to display the Transition Detector on/off menu.

	4.4-2 Select TURN OFF to display the ENTER
	PASSWORD BOX (large). The 10 digit Inquiring
	Code will be displayed inside the BOX.
	4.4-3 Contact your dealer with the 10 digit Inquiring
	Code. Your PASSWORD will be sent after your	ENTER PASSWORD BOX
	user registration information is confirmed.	(large)
	5. Using the MY TEXT PASSWORD function
	This item allows you to display your own message (MY TEXT) on the START
	UP screen and INPUT-INFORMATION. It can be protected by a password to
	prevent it from being overwritten.
SECURITY	5.1 Writing the MY TEXT
	(1) Use the ▲/▼ buttons on the SECURITY menu
(continued)
	to select the MY TEXT WRITING menu and
	press the ► button. The MY TEXT WRITING
	dialog will be displayed.
	(2) The current MY TEXT will be displayed on the first 3
	lines. If not yet written, the lines will be blank.
	Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter
	characters. The RESET button can be used to erase 1 character at a time. Also if
	you move the cursor to DELETE or ALL CLEAR on screen and push the ENTER
	or INPUT button, 1 character or all characters will be erased. The MY TEXT can
	be input up to 24 characters on each line.
	(3) To change an already inserted character, press
	the ▲/▼ button to move the cursor to one of
	the first 3 lines, and use the ◄/► buttons to
	move the cursor on the character to be changed.
	After pressing the ENTER or INPUT button, the
	character is selected. Then, follow the same
	procedure as described at the item (2) above.
	(4) To finish entering text, move the cursor to the
	SAVE on screen and press the ENTER or INPUT
	button. To revert to the previous MY TEXT
	without saving changes, move the cursor to the
	CANCEL on screen and press the ENTER or
	INPUT button.
	• The MY TEXT WRITING function is available only when the MY TEXT
	PASSWORD function is set to TURN OFF.

52 (continued on next page)