Planar PR9020 user manual Projector, Name, Enter or Input button

NETWORK Menu

NETWORK Menu (continued)

Item	Description
	(1) Use the▲/▼ buttons on the NETWORK menu to select the
	PROJECTOR NAME menu and press the ► button. The
	PROJECTOR NAME dialog will be displayed.
	(2) The current PROJECTOR NAME
	will be displayed on the first 3 lines.
	If not yet written, the lines will be
	blank.
	Use the ▲/▼/◄/► buttons and
	the ENTER or INPUT button to
	select and enter characters. The
	RESET button can be used to
	erase 1 character at a time. Also if
	you move the cursor to DELETE or
	ALL CLEAR on screen and push
	the ENTER or INPUT button, 1
	character or all characters will be
	erased.
PROJECTOR	The PROJECTOR NAME can be
	input up to 64 characters.
NAME
	(3) To change an already inserted
	character, press the ▲/▼ button to
	move the cursor to one of the first 3
	lines, and use the ◄/► buttons to
	move the cursor on the character
	to be changed. After pressing
	the ENTER or INPUT button, the
	character is selected. Then, follow
	the same procedure as described at
	the item (2) above.
	(4) To finish entering text, move the
	cursor to the SAVE on screen
	and press the ENTER or INPUT
	button. To revert to the previous
	PROJECTOR NAME without saving
	changes, move the cursor to the
	CANCEL on screen and press the
	ENTER or INPUT button.

(continued on next page)

57