Onkyo 29400095 About Home Theater, Enjoying Home Theater, Front left and right speakers

Page 14

About Home Theater

Enjoying Home Theater

Thanks to the AV receiver’s superb capabilities, you can enjoy surround sound with a real sense of movement in your own home—just like being in a movie theater or concert hall. With DVDs you can enjoy DTS and Dolby Digital. With analog or digital TV, you can enjoy Dolby Pro Logic IIx, DTS Neo:6, or Onkyo’s original DSP listening modes.

Front left and right speakers

These output the overall sound. Their role in a home theater is to provide a solid anchor for the sound image. They should be positioned facing the listener at about ear level, and equidistant from the TV. Angle them inward so as to create a triangle, with the listener at the apex.

Front high left and right speakers

These speakers are necessary to enjoy Dolby Pro Logic IIz Height, etc. They enhance significantly the spatial experience.

Position them at least 3.3 feet (100 cm) above the front left and right speakers (and as high as possible). Although it is acceptable to place left and right at an angle slightly wider than the front left and right speakers. Ideally they should be positioned directly above the front left and right speakers. Front high and surround back speakers produce no sound at the same time.

Center speaker

This speaker enhances the front left and right speakers, making sound movements dis- tinct and providing a full sound image. In movies it’s used mainly for dialog.

Position it close to your TV fac- ing forward at about ear level, or at the same height as the front left and right speakers.

Surround back left and right speakers

These speakers are necessary to enjoy Dolby Digital EX, DTS-ES Matrix, DTS-ES Discrete, etc. They enhance the realism of surround sound and improve sound localiza- tion behind the listener. Position them behind the listener about 2–

3 feet (60–100 cm) above ear level. Front high and surround back speakers produce no sound at the same time.

Subwoofer

The subwoofer handles the bass sounds of the LFE (Low-Frequency Effects) channel. The volume and quality of the bass output from your subwoofer will depend on its position, the shape of your listening room, and your listening posi- tion. In general, a good bass sound can be obtained by installing the subwoofer in a front corner, or at one-third the width of the wall, as shown.

You can connect the powered subwoofer with two SUBWOOFER PREOUT jacks respectively.

Tip: To find the best position for your sub- woofer, while playing a movie or some music with good bass, experiment by placing your subwoofer at various posi- tions within the room, and choose the one that provides the most satisfying results.

1/3 of wall position

Surround left and right speakers

These speakers are used for precise sound positioning and to add realistic ambience.

Position them at the sides of the listener, or slightly behind, about 2–3 feet (60–100 cm) above ear level. Ideally they should be equidistant from the listener.

Corner position

14

Image 14
Contents HT-RC160 Important Safety Instructions AvisPreventing Hearing Loss Caution PrecautionsPower Batteries and Heat Exposure WarningSpeaker cable labels Supplied AccessoriesMake sure you have the following accessories Contents Processing FeaturesAmplifier ConnectionsZone 2 Room Multiroom CapabilityMain Room Front high left and right speakersFront & Rear Panels Front PanelFront & Rear Panels DisplayRear Panel CBL/SAT TV/TAPE IN/OUTGame VCR/DVR IN/OUTAiming the Remote Controller Remote ControllerInstalling the Batteries Remote Controller Controlling the AV ReceiverFront left and right speakers About Home TheaterEnjoying Home Theater Center speakerSpeaker Configuration Connecting the AV ReceiverConnecting Your Speakers Using Dipole SpeakersSpeaker Connection Precautions Connecting the AV ReceiverConnecting a Powered Subwoofer Connecting the Speaker CablesFront high Bi-amping the Front Speakers Bi-amping Speaker HookupConnecting the AM Loop Antenna Connecting AntennaConnecting the Indoor FM Antenna Attach the FM antenna, as shownUsing a TV/FM Antenna Splitter Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna AV Cables & Jacks About AV ConnectionsOptical Digital Jacks AV Connection Color Coding Supported Audio Formats Connecting Components with HdmiAbout Hdmi About Copyright ProtectionMaking Hdmi Connections Video SignalsAudio Signals StepVideo Connection Formats Connecting Both Audio & VideoWhich Connections Should I Use? DVD/BD player, etc Audio Signal Flow Chart Signal SelectionSignal Selection Example Audio Connection FormatsAudio Connection Connecting a TV or ProjectorVideo Connection TV, projector EtcConnecting a DVD/BD Player DVD/BD playerConnecting a VCR or DVD/BD Recorder for Playback DVD/BD recorderRecorder Connecting a VCR or DVD/BD Recorder for RecordingMake the audio connection a Digital in Optical 2 CD Satellite, cable, set-top box, etcConnecting a Game Console Game ConsoleMake the connection a Connecting a Camcorder or Other DeviceConnecting a Portable Audio player Make the audio connection aAn MC head amp and phono preamp are necessary to Connecting a CD Player or TurntableCD Player or Turntable MM with Built-in Phono Preamp Step Phono preamp is necessary to connect a turntable thatConnecting a Cassette, CDR, MiniDisc, or DAT Recorder If Your iPod Supports Video Connecting an RI DockConnecting a Dock with the Universal Port connector If Your iPod Doesn’t Support VideoAuto Power On/Standby Connecting Onkyo u ComponentsConnecting the Power Cord Make the uconnection see illustration belowSmooth Operation in a Few Easy Steps Turning On the AV ReceiverTurning On and Standby Have you connected an Onkyo RI Dock?Using the Onscreen Setup Menus First Time SetupUsing the Display to change the settings Onscreen Setup Menus and DisplayHdmi Input Setup First Time SetupVideo Input Setup Video Input, and then press Component Video SetupTons to select 2. Component Then use the Left and Right e/r buttons to selectInput, and then press Enter Digital Input SetupTons to select 3. Digital Audio Press the Receiver button Followed by the Setup button Speaker SettingsPowered Zone Tons to select 1. Speaker SetTons to select 2. Tuner, FM/AM Frequency Step SetupPress the Receiver button Use the Left and Right e/r Buttons to select 200kHz/10kHzChanging the Input Display First measurement point Audyssey 2EQ Room Correction and Speaker SetupMeasurement Positions Second measurement pointTurn on the AV receiver Using Audyssey 2EQWhen you’ve finished, press the Enter button Connected TVFollowing screen appears CancelPress Enter SaveSpeaker Detect Error Error MessagesDisconnect the speaker setup MicrophoneSpeaker matching error Changing the Speaker Settings ManuallyUsing a Powered Subwoofer Writing ErrorBasic Operations Select a listening mode and enjoySee Using the Listening Modes on Selecting the Input SourceBasic Operations Adjusting the Bass & TrebleSetting the Display Brightness Displaying Source InformationMuting the AV receiver Using the Sleep TimerUsing Headphones You can temporarily mute the output of the AV receiverListening to the Radio Using the TunerTuning into Radio Stations Listening to the RadioDeleting Presets Presetting AM/FM StationsSelecting Presets Listening to the RadioCompatible iPod models UP-A1 series Dock for iPodAbout the UP-A1 series Dock Putting Your iPod in the DockUP-A1 series Dock for iPod Using Your iPod models Alarm ClockCharging Your iPod models Battery Controlling iPodStatus messages Recording Separate AV Sources RecordingAV Recording Selecting Listening Modes Using the Listening ModesSelecting with the Remote Controller Selecting on the AV receiverMono/Multiplex Sources Using the Listening ModesListening Modes Available for Each Source Format Available Listening ModesStereo Source PLIIx Movie Channel SourcesDirect Stereo Mono DolbyDigital Plus/TrueHD Multichannel PLIIx MusicDirect Resolution Audio/DTS-HD Master Audio PLIIz HeightDTS-ES Discrete/Matrix Sources Discrete DTS-ES MatrixAbout the Listening Modes Onkyo Original DSP Modes Main menu Submenus Advanced SetupOnscreen Setup Menus PagesSpeaker Setup Advanced SetupCommon Procedures in Setup Menu Speaker Distance LPF of LFEDouble Bass*9 Unit FeetPress the Down w button to select Channel, and then use Equalizer SettingsLevel calibration Left and Right e/ r buttons to select a speakerDolby Settings PLIIx Music 2ch Input Audio AdjustMultiplex/Mono Settings Dolby EXTheater-Dimensional Setting DTS Setting Neo6 MusicAudyssey Settings Using the Audio Settings Music Optimizer Audyssey Dynamic VolumeCinemaFILTER Speaker LayoutWhen you’ve finished, press the Setup button Listening Mode Preset menu appearsSignal format selection menu appears Assigning Listening Modes to Input SourcesSync Source SetupIntelliVolume Name Edit To correct a characterOSD Setup Miscellaneous Volume/OSD SetupVolume Setup Tuner Hardware SetupRemote ID Hdmi Control Rihd Power ControlColor Disconnect → Rihd OffLock Setup Using the Video SettingsDigital Input Signal Formats Connecting Your Zone 2 Speakers to an Amp in Zone Connecting ZoneConnecting Your Zone 2 Speakers Directly to the AV receiver ZoneUse the Up and Down q/ w Setting the Powered ZoneButtons to select Powered Zone 2, and use the Left Right e/r buttons to selectControlling Zone 2 from the AV receiver Using ZoneControlling Zone 2 with the Remote Controller Zone 2 button, and then Adjusting the Volume for ZoneMuting Zones Use the VOL q/ w buttonController Setup, and then Preprogrammed Remote Control CodesLooking up for Remote Control Code Controlling Other ComponentsIf you can control component Remote Mode Setup menuControlling Other Components Buttons to select Works,Entering Remote Control Codes Resetting the Remote Controller Remote Control Codes for Onkyo Components Connected via uResetting Remote Mode Buttons Controlling a TV Controlling a DVD/BD Player, or DVD/BD Recorder Playback button Play Mode buttonControlling a VCR or PVR Controlling a Satellite Receiver or Cable Receiver Controlling a CD Player Disc +/- buttonControlling an RI Dock When Using an RI DockWorks as a Mode button when used with a DS-A2 RI Dock Turns on the backlight for 30 secondsRewind and Fast Forward 5/4 buttons Controlling a Cassette RecorderPrevious and Next 7/6 buttons Reverse Play t buttonTroubleshooting Troubleshooting There’s no picture from a source connected to an Hdmi Remote Controller Remote controller doesn’t workAV receiver’s remote controller doesn’t control your iPod Onscreen menus don’t appearZone There’s no sound Others Sound changes when I connect my headphonesRecording Can’t record How do I change the language of a multiplex sourceVideo Section SpecificationsAmplifier Section Tuner SectionVideo Resolution Chart Memo 103Onkyo Europe Electronics GmbH Onkyo Europe UK Office