Onkyo 29400095 Basic Operations, Selecting the Input Source, Select a listening mode and enjoy

Basic Operations

Selecting the Input Source

This section explains how to select the input source (i.e., the AV component that you want to listen to or watch).

MASTER VOLUME

INPUT

SELECTOR

RECEIVER

VOL q/w

INPUT SELECTOR

1

AV receiver	Remote
	controller

or

Use the AV receiver’s input selector buttons to select the input source.

To select the input source with the remote controller, press the [RECEIVER] button, and then press the INPUT SELECTOR but- tons.

2	Start playback on the source component.
	When you select DVD/BD or another video component, on your TV, you’ll
	need to select the video input that’s connected to the AV receiver’s HDMI
	OUT, COMPONENT VIDEO OUT or MONITOR OUT.
	On some DVD/BD players, you may need to turn on the digital audio output.

3	AV receiver	Remote
		controller

or

To adjust the volume, use the MASTER VOLUME control, or the remote controller’s VOL [q]/[w] button.

The volume can be set to Min, 1 through 79, or Max.

The AV receiver is designed for home theater enjoyment. It has a wide volume range, allowing precise adjustment.

4	Select a listening mode and enjoy!
	See “Using the Listening Modes” on page 59.

50