Onkyo 29400095 instruction manual Miscellaneous Volume/OSD Setup, Volume Setup

Advanced Setup—Continued

Miscellaneous (Volume/OSD) Setup

This section explains the items on the “Miscellaneous” menu.

1	Press the [RECEIVER] button followed by
	the [SETUP] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make sure the
	appropriate external input is selected on your TV.
2	Use the Up and Down [q]/[w] buttons to
	select “6. Miscellaneous”, and then press
	[ENTER].
	The “Miscellaneous” menu appears.
			6. Miscellaneous
		1.	Volume Setup
		2.	OSD Setup
3	Use the	Up and Down [q]/[w] buttons to
	select an item, and then press [ENTER].
	The screen for that item appears.
4	Use the Up and Down [q]/[w] buttons to
	select an item, and use the Left and Right
	[e]/[r] buttons to change it.
	The items are explained below.
5	When you’ve finished, press the [SETUP]
	button.

The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

Volume Setup

■Maximum Volume

With this setting, you can limit the maximum volume. The Maximum Volume range is “Off”, 79 to 30.

■Power On Volume

With this preference, you can specify the volume setting to be used each time the AV receiver is turned on.

The range is “Last”, “Min”, 1 to 79 or “Max”.

To use the same volume level that was used when the AV receiver was turned off, select “Last”.

The “Power On Volume” cannot be set higher than the “Maximum Volume” setting.

■Headphone Level

With this preference, you can specify the headphone vol- ume relative to the main volume. This is useful if there’s a volume difference between your speakers and your headphones. The headphones level can be set from –12 dB to +12 dB.

OSD Setup

■Immediate Display

This preference determines whether operation details are displayed onscreen when an AV receiver function is adjusted.

On: Displayed (default).

Off: Not displayed.

Even when “On” is selected, operation details may not be output if the input source is connected to an HDMI IN.

■Display Position

This preference determines where on the screen opera- tion details are displayed.

Bottom: Bottom of the screen (default).

Top: Top of the screen.

■Language

This setting determines the language used for the onscreen setup menus. You can select: English, Deutsch, French, or Spanish.

77